I-share ang Iyong Laro sa Full HD na may Mababang Latency

GA

/

10 minuto

/

Na-update

Nasa gitna ka ng laban sa Clair Obscur: Expedition 33, tinatangkang magsagawa ng combo na karapat-dapat sa palakpakan, at sa oras na nais mong i-screen share ito, nagiging isang pixelated na kalamidad ang iyong screen, naglalaon ang iyong boses ng dalawang segundo, at pakiramdam ng iyong mga kaibigan ay nandoon ka pa sa 2010. Nakakainis? Totally.

Sa kabutihang palad, ang teknolohiya para sa screen sharing ay umunlad nang higit. Magagawa mong i-stream ang iyong gameplay sa nakakamangha na Full HD (pati na rin 4K) gamit ang tamang mga kagamitan, na may screen sharing na napakagaan at lokal ang pakiramdam, at may mababang latency. Kung nagmamalaki ka, nakikipag-co-op, o nagsasanay, makakatulong ang gabay na ito para gawin mo ito tulad ng isang pro.

Ano ang Screenshare & Bakit Ito Mahalagang Para sa Paglalaro

Sa simpleng mga termino, ang screenshare ay nagbibigay-daan sa iyo upang i-broadcast ang iyong screen sa iba sa real-time. Bagamat para sa mga manlalaro, ang pagkopya ng karanasan ay kasing halaga ng “pagsasabay”. Kung nagmamalaki ka ng isang mahirap na naipon na kill streak o tinutulungan ang isang newbie na maglakbay sa Elden Ring, ang layunin ay may kasamang makinis, mataas na kalidad na playback na walang bagal.

Mga Kilalang Gamit:

  • Live co-op play: Hayaan ang iyong kaibigan na mag-take over sa ilang sandali sa panahon ng live co-op play o tumulong na i-guide sila mula sa ibang lokasyon.

  • Game coaching: Turuan o matuto ng mga bagong kakayahan sa pamamagitan ng one-on-one na feedback.

  • Multiplayer syncing: Mag-sync nang magkasama para sa couch gaming, na nangyayari kahit na malayo kayo.

  • Streaming setup: Gumamit ng mga screen streamer tools upang itulak ang gameplay nang direkta sa Twitch o YouTube.

Gayunpaman, ang malinaw na resolusyon ay mahalaga para sa tagumpay. Gayundin, ang ultra-low latency ay isang bagay na kinakailangan.

Bakit Mahalaga ang Latency at Resolusyon

Pagdating sa screen sharing ng iyong gameplay, dalawang bagay ang nagpapalayo sa isang epikong stream mula sa isang hindi mapanood na kalat: resolusyon at latency.

Simulan natin sa resolusyon. Ang mataas na resolusyon ay nagpapahintulot sa mga manonood na makita ang eksaktong nakikita mo: bawat detalye ng iyong custom UI, bawat texture ng kapaligiran, at bawat flick shot na tumama na may pixel-perfect na katumpakan. Mahalaga ang kalinawan kapag nag-a-present ka ng isang build, nag-stream ng isang laban, o nagpapakita ng mga mod. Ang malabo, low-res streams ay maaaring gawing mediocre ang pinakamagagandang laro.

Pagkatapos may latency — ang tahimik na pumatay ng real-time na interaksyon. Ang low-latency screen sharing ay ang pagkakaiba sa pagitan ng isang tao na tumutugon kasama mo at isang tao na tumutugon pagkatapos mo. Ito ang dahilan kung bakit parang live ang iyong gameplay, hindi mabagal. 

Isipin mo na susubukan mong iwasan ang isang rocket launcher sa Apex Legends na may dalawang segundong pagkaantala; sa oras na talagang maabot ng iyong stream, nasa labas ka na ng buong laro. Hindi iyon ideal.

Ang tamang setup ng screen sharing ay hindi lamang tungkol sa pagpapakita ng iyong screen. Ito ay tungkol sa paghahatid ng karanasan habang ito ay nangyayari, na walang pagkaantala, kasama ang mataas na fidelidad.

Karaniwang Screenshare na Hamon para sa mga Gamer

Kapag mayroon kang matibay na hardware, ang screen sharing ay minsang nakakaramdam na parang may taong nakikipaglaban sa kanilang setup. Marahil ay nakatagpo na ang mga manlalaro ng ilang mga sakit na punto tulad ng mga ito:

  • Input Delay: Pumindot ka at walang nangyayari, pagkatapos ay biglang lahat ay nangyayari nang sabay-sabay. Pareho ang iyong timing at kasiyahan ay naapektuhan dahil sa input lag.

  • Pixelated Visuals: Nagmamay-ari ka ng RTX 4090, ngunit ang iyong screenshare ay tila naglalaro ka ng Minecraft sa isang napaka-lumang telepono. Hindi ito ang pagpapalabas na iyong nais.

  • Audio Desync: Pagsabog ng mga putok pagkatapos mong ma-respawn? Klasiko. Ang buong karanasan ay tila mali kapag hindi magkatugma ang audio at visuals.

  • Frame Rate Drops: Sa simula ay maayos na 60 FPS. Pagkatapos, isa na itong jittery mess. Nawala na ang maayos na paggalaw.

Bakit Nangyayari ang mga Bagay na Ito?

  • Bandwidth Bottlenecks: Ang limitadong upload speeds ay hindi makapagpanatili ng mataas na kalidad na streaming, lalo na kapag sa Wi-Fi.

  • Encoding Lag: Ang mga magagaan o hindi maayos na optimized na apps ay nahihirapang i-compress ang video sa real time.

  • Network Hops: Ang mas malayo ang biyahe ng signal (at mas maraming server na madadaanan nito), mas mataas ang latency, lalo na kung walang global server optimization.

Pinakamahusay na Mga Tool sa Screen Sharing para sa mga Gamer (2025 Update)

1. DeskIn

Deskin remote game

Pinakamahusay para sa: Mga manlalaro na nais ng ultra-smooth 4K streaming, mababang latency, at buong suporta ng controller sa lahat ng device

Ang DeskIn, na nilikha para sa gaming community, ay hindi katulad ng karaniwang remote desktop application. Tinitiyak nito na ang iyong gameplay ay agad na tumutugon at mukhang maliwanag, na may latency na mas mababa sa 40ms at sumusuporta sa Full HD o kahit 4K na resolusyon. Kung ikaw ay nagsasanay ng isang kaibigan sa Valorant o nag-stream mula sa iyong gaming PC papunta sa isang low-spec na tablet, dinadala ng DeskIn ang buong karanasan.

Ang dahilan kung bakit ang DeskIn ay isa sa pinakamahusay na screen sharing options para sa mga gamer ay nagbibigay ito ng matibay na suporta para sa controller input. Maaaring ikonekta ng mga gumagamit ang mga gamepad sa isang lokal na device na ang mga input ay nairehistro na parang ang controller ay kumokonekta sa host PC. Tinitiyak nito ang isang lag-free native gameplay experience sa kabuuan.

May mga gamer-friendly na tampok ang DeskIn, tulad ng Auto 3D Game View, na awtomatikong nag-aayos para sa unang- o pangatlong-perspektibo na mga laro, kaya't ang lahat ay mukhang tama nang hindi mo kailangang gumalaw ng daliri.

👉 i-click dito upang i-download

2. Parsec

Pinakamahusay para sa: Co-op gaming at remote party play

Ang Parsec ay paborito ng mga gamer na gusto ang pakiramdam ng lokal na multiplayer kahit na wala sa parehong silid. Nag-aalok ito ng makinis na 4K streams at gumagamit ng peer-to-peer connections upang mapanatiling mababa ang latency at maatungal ang gameplay.

Maganda ang gumagana ng Parsec kapag nailalaro mo ang mga jumps sa platformer o nakikipaglaban sa isang magulong party game. Sinusuportahan nito ang maraming controllers, kaya't maaari kang maglaro nang walang hirap dahil ang setup ay super madali. Ito ay isang maaasahang saan at masayang go-to option para sa mas nakakarelaks na co-op nights at mabilis na gaming sessions kasama ang iyong mga kaibigan, kahit na maaaring hindi ito nag-aalok ng lahat ng advanced features ng DeskIn.

3. Steam Remote Play Together

steam remote play together

Pinakamahusay para sa: Mga gumagamit ng Steam na naghahanap ng simpleng co-op play

Ang Steam Remote Play Together ay nilulutas ang problema ng paglalaro ng mga local multiplayer games online kasama ang mga kaibigan sa loob ng Steam — hindi talaga kumplikado ang setup. Tanging ang host ang kailangang magmay-ari at mag-install ng laro. Para sa iba pang mga manlalaro, walang kailangan na pagbili o pag-install; lahat ay makakapasok at makakapaglaro nang sabay-sabay. Nangangahulugan ito na maaari mong gawing online multiplayer ang couch co-op, split-screen, o shared-screen na mga laro sa loob ng ilang segundo.

Gayundin, ang iyong mga kaibigan ay makakapasok mula sa anumang lokasyon dahil ito ay gumagana sa maraming sistema: Windows, macOS, Linux, iOS, Android, at Steam Deck. Maaaring gumamit ang mga tao ng mga indibidwal na controller o gumamit ng shared devices. Ang keyboard pati na rin ang mouse ng host ay maaaring ibahagi kapag kailangan.

4. Discord

discord app

Pinakamahusay para sa: Mabilis na pagbabahagi ng gameplay sa mga chat o grupo

Ang Discord ay ang paboritong lugar kung saan ang karamihan sa mga gamer ay gustong mag-hangout, at ang screen share nito ay perpekto para sa mabilis at impormal na pagbabahagi. Maaari mong ibahagi ang iyong screen nang direkta sa mga pribadong tawag o channel kung nais mong ipakita ang isang build, mag-stream ng gameplay, o tulungan ang isang kaibigan sa isang mahirap na antas, at ang pinakamaganda sa lahat, walang dagdag na setup ang kailangan.

Ang mga stream ay maaaring tumakbo sa 720p bilang default. Ang mga Nitro users ay maaaring makakuha ng mga pag-upgrade hanggang sa 1080p o 4K sa 60FPS. Ito ay pinakamainam para sa real-time na presentations pati na rin sa mga chill session kasama ang mga kaibigan, kahit na hindi ito sumusuporta sa input sharing. Hindi ito nakabuo para sa ultra-competitive, low-latency na pagganap, kundi para sa madaling pagbabahagi nang hindi kinakailangang gawin ito kasabay ng iyong squad, nagagawa ng Discord ang iyong trabaho.

Paano Mag-Screen Share ng Mga Laro sa Full HD na may Mababang Latency

Hayaan nating himayin — hakbang-hakbang — gamit ang DeskIn, isa sa mga pinaka-rated na screen share programs.

Hakbang-hakbang na Setup gamit ang DeskIn

  1. I-download at i-install ang DeskIn sa parehong iyong gaming PC (host) at sa remote device na iyong maa-access. Pumunta sa opisyal na website ng Deskin o hanapin ito sa App Store/ Google Play

  2. Gumawa ng DeskIn account at mag-log in sa parehong devices

deskin remote access devices connection settings
  1. Ikonekta ang iyong mga device batay sa iyong setup:

  1. Upang ibahagi ang isang laro sa telepono: I-scan lang ang QR code na ipinapakita sa target device.

  2. Upang ibahagi ang isang laro sa PC: Pumunta sa Screen Mgt > Piliin ang Device upang simulan ang pagbabahagi.

4. Enjoy the game with high-resolution visuals and ultra-low latency

Mga Tip para sa Pag-optimize ng iyong Network

Walang bagay ang mas nagwawasak ng isang mahusay na session ng screen share nang mas mabilis kaysa sa pixelated chaos, stutters, at lag. Ang iyong network setup ay isang bagay na kailangan mong ayusin ng tama kung nais mo ang buttery-smooth, high-res streaming experience. Narito kung paano ito mapapaganda tulad ng isang pro:

  • Gumamit ng Ethernet sa halip na Wi-Fi: Kung mayroon mang paggalaw na agad na nagpapabuti sa pagganap, iyon ay ang pag-plug in. Lagi nang nangunguna ang Ethernet sa Wi-Fi: hindi nangyayari ang random drops, at wala ang mga mabagal na koneksyon. Para sa maayos na Full HD o 4K streaming, ito ang pinakamahusay.

  • Mag-upgrade sa isang high-speed router: Maghanap para sa dual-band o tri-band router (2.4GHz plus 5GHz) upang hawakan ang maraming devices nang hindi nagiging congested ang koneksyon, lalo na kung nagbabahagi ka ng Wi-Fi kasama ang mga roomates o pamilya

  • Suriin ang iyong bandwidth limits: Siguraduhing may minimum na 25 Mbps na upload speed kung nag-stream ka sa 1080. Para sa 4K, 30–50 Mbps ang kailangan mo. Kung hindi ka sigurado kung anong bilis ang gamit mo, magpatakbo ng mabilis na pagkutsinta sa speed test website. Malamang na malabo ang mga bagay kung mababa ang iyong mga numero.

  • Minimize ang mga interferences sa network: Ilagay ang iyong router sa isang sentro at bukas na lugar. Huwag ilagay ito sa loob ng cabinet. Panatilihin itong malayo sa cordless phones at microwaves; ang iyong signal ay maaaring maapektuhan.

  • Idiskonekta o itigil ang mga background tasks: Isara ang auto-updates, cloud syncing (Google Drive, OneDrive), at iba pang mabigat na network tasks na maaaring kumain ng bandwidth at lumikha ng mga spike ng lag.

Bakit ang DeskIn ay ang Kaibigan ng Gamer

Ang DeskIn ay hindi lamang isa pang remote access app—ito ay dinisenyo na partikular na isipin ang mga gamer. Mula sa totoong pagganap hanggang sa cross-platform flexibility at mga tampok na matibay. Nakakabagay ito ng lahat ng mga kinakailangan para sa mga modernong gamer. at narito ang mga dahilan kung bakit ito namumukod-tangi:

ZeroSync® Engine = Ultra-Low Latency

Ang proprietary na ZeroSync® engine ng DeskIn ay gumagamit ng global edge nodes at real-time encoding optimization upang bawasan ang latency sa ibaba ng 40ms. Nangangahulugan ito na ang gameplay ay tumutugon at synced. Kung ikaw ay tumatakbo mula sa mga bala sa isang shooter o nagsasagawa ng frame-perfect combos, pinapanatili ng DeskIn na ikaw ay naka-sync.

Interactive Full HD at 4K Gaming

deskin remote gaming full hd and 4k resolution

Masiyahan sa mga kristal na malinaw na visuals na sumusuporta sa 4K 60FPS at 2K 144FPS. Tinitiyak ng DeskIn ang matitinding detalye kasama ang fluid motion, na angkop para sa kompetitibo at nakaka-engganyong gameplay.

Mga Mabibigat na Laro, Magagaan na Device

Dahil sa mataas na kahusayan sa pag-decode at pag-encode, nag-stream ang DeskIn ng mga mapaghamong laro tulad ng “Cyberpunk 2077,” “Elden Ring,” o “Death Stranding” na may makinis na frame rates at maliwanag na resolusyon, kahit na sa mga device na may minimal na specs.

Maaari mo ring gamitin ang mga pasadyang mobile control overlays kapag naa-access ang iyong PC mula sa isang telepono —suriin kung paano gamitin ang mga customized gaming keyboards at hotkeys sa mobile.

Tunay na Suporta sa Cross-Platform

Maglaro mula sa Windows, macOS, iOS, o Android. Kung gumagamit ka ng isang tablet, telepono, laptop, o desktop, nagbibigay ang DeskIn ng isang pare-pareho, makapangyarihang karanasan sa lahat ng device.

Kung ikaw ay naglalaro mula sa isang Mac, iPhone, o Android tablet, nag-aangkop ang DeskIn sa iyong setup —tingnan kung paano maglaro ng mga laro ng Windows sa isang Mac tulad ng isang pro.

Palawakin ang Iyong Game Screen

deskin remote gaming screen extension

Gawing isa pang display ang iyong Mac o iyong iPad. Ang Discord, mga game maps, at kahit na mga walkthrough ay mahusay para panatilihin sa isang screen lamang kapag ikaw ay naglalaro sa iba. Ang setup na ito ay perpekto para sa mga strategy o multitasking games.

Nais mo bang dalhin ito sa susunod na antas?Alamin kung paano i-set up ang dual monitor layout para sa gaming at mas mahusay na i-manage ang Discord, maps, o streams habang naglalaro ka.

Immersive Auto 3D Game View

deskin remote gaming 3d view

Awtomatikong kinikilala ng DeskIn ang mga First-Person (FPP) at Third-Person (TPP) na mga game mode at ina-adjust ang streaming view ayon dito. Nag.resulta ito sa isang mas nakaka-immerse, native-like remote experience kapag ikaw ay malalim sa mga action-heavy na mga laro.

I-upgrade ang Iyong Gameplay na may Pro-Level Screensharing

Ang masamang screenshare ay tiyak na makasisira sa ilang mga kamangha-manghang laro. Nasa zone ka habang ang gameplay ay tila nag-aapoy, at bigla, ang iyong stream ay nakakaranas ng ilang mga isyu. Ito ay nagiging isang pixelated mess o nagsisimulang mag-stutter. Sa ilang matalino na tweaks sa tamang setup, maaari mong i-stream ang iyong gameplay sa Full HD na may halos walang lag. Wala nang pixel soup. Wala nang stutter parties.

Ang DeskIn ay hindi lamang gumagana — ito ay itinayo upang mag-perform nang mas mahusay para sa mga gamer na nagmamalasakit sa kalidad. Kaya kung ikaw ay pagod na sa dealing with dropped frames, laggy inputs, at clunky na screen-sharing tools, oras na para mag-upgrade sa isang bagay na itinayo para sa iyong mahal: makinis, seamless gameplay na talagang mukhang kasing ganda ng pakiramdam nito.

I-click dito upang subukan ang Deskin at magsimula ng screen sharing sa tunay na Full HD

Nasa gitna ka ng laban sa Clair Obscur: Expedition 33, tinatangkang magsagawa ng combo na karapat-dapat sa palakpakan, at sa oras na nais mong i-screen share ito, nagiging isang pixelated na kalamidad ang iyong screen, naglalaon ang iyong boses ng dalawang segundo, at pakiramdam ng iyong mga kaibigan ay nandoon ka pa sa 2010. Nakakainis? Totally.

Sa kabutihang palad, ang teknolohiya para sa screen sharing ay umunlad nang higit. Magagawa mong i-stream ang iyong gameplay sa nakakamangha na Full HD (pati na rin 4K) gamit ang tamang mga kagamitan, na may screen sharing na napakagaan at lokal ang pakiramdam, at may mababang latency. Kung nagmamalaki ka, nakikipag-co-op, o nagsasanay, makakatulong ang gabay na ito para gawin mo ito tulad ng isang pro.

Ano ang Screenshare & Bakit Ito Mahalagang Para sa Paglalaro

Sa simpleng mga termino, ang screenshare ay nagbibigay-daan sa iyo upang i-broadcast ang iyong screen sa iba sa real-time. Bagamat para sa mga manlalaro, ang pagkopya ng karanasan ay kasing halaga ng “pagsasabay”. Kung nagmamalaki ka ng isang mahirap na naipon na kill streak o tinutulungan ang isang newbie na maglakbay sa Elden Ring, ang layunin ay may kasamang makinis, mataas na kalidad na playback na walang bagal.

Mga Kilalang Gamit:

  • Live co-op play: Hayaan ang iyong kaibigan na mag-take over sa ilang sandali sa panahon ng live co-op play o tumulong na i-guide sila mula sa ibang lokasyon.

  • Game coaching: Turuan o matuto ng mga bagong kakayahan sa pamamagitan ng one-on-one na feedback.

  • Multiplayer syncing: Mag-sync nang magkasama para sa couch gaming, na nangyayari kahit na malayo kayo.

  • Streaming setup: Gumamit ng mga screen streamer tools upang itulak ang gameplay nang direkta sa Twitch o YouTube.

Gayunpaman, ang malinaw na resolusyon ay mahalaga para sa tagumpay. Gayundin, ang ultra-low latency ay isang bagay na kinakailangan.

Bakit Mahalaga ang Latency at Resolusyon

Pagdating sa screen sharing ng iyong gameplay, dalawang bagay ang nagpapalayo sa isang epikong stream mula sa isang hindi mapanood na kalat: resolusyon at latency.

Simulan natin sa resolusyon. Ang mataas na resolusyon ay nagpapahintulot sa mga manonood na makita ang eksaktong nakikita mo: bawat detalye ng iyong custom UI, bawat texture ng kapaligiran, at bawat flick shot na tumama na may pixel-perfect na katumpakan. Mahalaga ang kalinawan kapag nag-a-present ka ng isang build, nag-stream ng isang laban, o nagpapakita ng mga mod. Ang malabo, low-res streams ay maaaring gawing mediocre ang pinakamagagandang laro.

Pagkatapos may latency — ang tahimik na pumatay ng real-time na interaksyon. Ang low-latency screen sharing ay ang pagkakaiba sa pagitan ng isang tao na tumutugon kasama mo at isang tao na tumutugon pagkatapos mo. Ito ang dahilan kung bakit parang live ang iyong gameplay, hindi mabagal. 

Isipin mo na susubukan mong iwasan ang isang rocket launcher sa Apex Legends na may dalawang segundong pagkaantala; sa oras na talagang maabot ng iyong stream, nasa labas ka na ng buong laro. Hindi iyon ideal.

Ang tamang setup ng screen sharing ay hindi lamang tungkol sa pagpapakita ng iyong screen. Ito ay tungkol sa paghahatid ng karanasan habang ito ay nangyayari, na walang pagkaantala, kasama ang mataas na fidelidad.

Karaniwang Screenshare na Hamon para sa mga Gamer

Kapag mayroon kang matibay na hardware, ang screen sharing ay minsang nakakaramdam na parang may taong nakikipaglaban sa kanilang setup. Marahil ay nakatagpo na ang mga manlalaro ng ilang mga sakit na punto tulad ng mga ito:

  • Input Delay: Pumindot ka at walang nangyayari, pagkatapos ay biglang lahat ay nangyayari nang sabay-sabay. Pareho ang iyong timing at kasiyahan ay naapektuhan dahil sa input lag.

  • Pixelated Visuals: Nagmamay-ari ka ng RTX 4090, ngunit ang iyong screenshare ay tila naglalaro ka ng Minecraft sa isang napaka-lumang telepono. Hindi ito ang pagpapalabas na iyong nais.

  • Audio Desync: Pagsabog ng mga putok pagkatapos mong ma-respawn? Klasiko. Ang buong karanasan ay tila mali kapag hindi magkatugma ang audio at visuals.

  • Frame Rate Drops: Sa simula ay maayos na 60 FPS. Pagkatapos, isa na itong jittery mess. Nawala na ang maayos na paggalaw.

Bakit Nangyayari ang mga Bagay na Ito?

  • Bandwidth Bottlenecks: Ang limitadong upload speeds ay hindi makapagpanatili ng mataas na kalidad na streaming, lalo na kapag sa Wi-Fi.

  • Encoding Lag: Ang mga magagaan o hindi maayos na optimized na apps ay nahihirapang i-compress ang video sa real time.

  • Network Hops: Ang mas malayo ang biyahe ng signal (at mas maraming server na madadaanan nito), mas mataas ang latency, lalo na kung walang global server optimization.

Pinakamahusay na Mga Tool sa Screen Sharing para sa mga Gamer (2025 Update)

1. DeskIn

Deskin remote game

Pinakamahusay para sa: Mga manlalaro na nais ng ultra-smooth 4K streaming, mababang latency, at buong suporta ng controller sa lahat ng device

Ang DeskIn, na nilikha para sa gaming community, ay hindi katulad ng karaniwang remote desktop application. Tinitiyak nito na ang iyong gameplay ay agad na tumutugon at mukhang maliwanag, na may latency na mas mababa sa 40ms at sumusuporta sa Full HD o kahit 4K na resolusyon. Kung ikaw ay nagsasanay ng isang kaibigan sa Valorant o nag-stream mula sa iyong gaming PC papunta sa isang low-spec na tablet, dinadala ng DeskIn ang buong karanasan.

Ang dahilan kung bakit ang DeskIn ay isa sa pinakamahusay na screen sharing options para sa mga gamer ay nagbibigay ito ng matibay na suporta para sa controller input. Maaaring ikonekta ng mga gumagamit ang mga gamepad sa isang lokal na device na ang mga input ay nairehistro na parang ang controller ay kumokonekta sa host PC. Tinitiyak nito ang isang lag-free native gameplay experience sa kabuuan.

May mga gamer-friendly na tampok ang DeskIn, tulad ng Auto 3D Game View, na awtomatikong nag-aayos para sa unang- o pangatlong-perspektibo na mga laro, kaya't ang lahat ay mukhang tama nang hindi mo kailangang gumalaw ng daliri.

👉 i-click dito upang i-download

2. Parsec

Pinakamahusay para sa: Co-op gaming at remote party play

Ang Parsec ay paborito ng mga gamer na gusto ang pakiramdam ng lokal na multiplayer kahit na wala sa parehong silid. Nag-aalok ito ng makinis na 4K streams at gumagamit ng peer-to-peer connections upang mapanatiling mababa ang latency at maatungal ang gameplay.

Maganda ang gumagana ng Parsec kapag nailalaro mo ang mga jumps sa platformer o nakikipaglaban sa isang magulong party game. Sinusuportahan nito ang maraming controllers, kaya't maaari kang maglaro nang walang hirap dahil ang setup ay super madali. Ito ay isang maaasahang saan at masayang go-to option para sa mas nakakarelaks na co-op nights at mabilis na gaming sessions kasama ang iyong mga kaibigan, kahit na maaaring hindi ito nag-aalok ng lahat ng advanced features ng DeskIn.

3. Steam Remote Play Together

steam remote play together

Pinakamahusay para sa: Mga gumagamit ng Steam na naghahanap ng simpleng co-op play

Ang Steam Remote Play Together ay nilulutas ang problema ng paglalaro ng mga local multiplayer games online kasama ang mga kaibigan sa loob ng Steam — hindi talaga kumplikado ang setup. Tanging ang host ang kailangang magmay-ari at mag-install ng laro. Para sa iba pang mga manlalaro, walang kailangan na pagbili o pag-install; lahat ay makakapasok at makakapaglaro nang sabay-sabay. Nangangahulugan ito na maaari mong gawing online multiplayer ang couch co-op, split-screen, o shared-screen na mga laro sa loob ng ilang segundo.

Gayundin, ang iyong mga kaibigan ay makakapasok mula sa anumang lokasyon dahil ito ay gumagana sa maraming sistema: Windows, macOS, Linux, iOS, Android, at Steam Deck. Maaaring gumamit ang mga tao ng mga indibidwal na controller o gumamit ng shared devices. Ang keyboard pati na rin ang mouse ng host ay maaaring ibahagi kapag kailangan.

4. Discord

discord app

Pinakamahusay para sa: Mabilis na pagbabahagi ng gameplay sa mga chat o grupo

Ang Discord ay ang paboritong lugar kung saan ang karamihan sa mga gamer ay gustong mag-hangout, at ang screen share nito ay perpekto para sa mabilis at impormal na pagbabahagi. Maaari mong ibahagi ang iyong screen nang direkta sa mga pribadong tawag o channel kung nais mong ipakita ang isang build, mag-stream ng gameplay, o tulungan ang isang kaibigan sa isang mahirap na antas, at ang pinakamaganda sa lahat, walang dagdag na setup ang kailangan.

Ang mga stream ay maaaring tumakbo sa 720p bilang default. Ang mga Nitro users ay maaaring makakuha ng mga pag-upgrade hanggang sa 1080p o 4K sa 60FPS. Ito ay pinakamainam para sa real-time na presentations pati na rin sa mga chill session kasama ang mga kaibigan, kahit na hindi ito sumusuporta sa input sharing. Hindi ito nakabuo para sa ultra-competitive, low-latency na pagganap, kundi para sa madaling pagbabahagi nang hindi kinakailangang gawin ito kasabay ng iyong squad, nagagawa ng Discord ang iyong trabaho.

Paano Mag-Screen Share ng Mga Laro sa Full HD na may Mababang Latency

Hayaan nating himayin — hakbang-hakbang — gamit ang DeskIn, isa sa mga pinaka-rated na screen share programs.

Hakbang-hakbang na Setup gamit ang DeskIn

  1. I-download at i-install ang DeskIn sa parehong iyong gaming PC (host) at sa remote device na iyong maa-access. Pumunta sa opisyal na website ng Deskin o hanapin ito sa App Store/ Google Play

  2. Gumawa ng DeskIn account at mag-log in sa parehong devices

deskin remote access devices connection settings
  1. Ikonekta ang iyong mga device batay sa iyong setup:

  1. Upang ibahagi ang isang laro sa telepono: I-scan lang ang QR code na ipinapakita sa target device.

  2. Upang ibahagi ang isang laro sa PC: Pumunta sa Screen Mgt > Piliin ang Device upang simulan ang pagbabahagi.

4. Enjoy the game with high-resolution visuals and ultra-low latency

Mga Tip para sa Pag-optimize ng iyong Network

Walang bagay ang mas nagwawasak ng isang mahusay na session ng screen share nang mas mabilis kaysa sa pixelated chaos, stutters, at lag. Ang iyong network setup ay isang bagay na kailangan mong ayusin ng tama kung nais mo ang buttery-smooth, high-res streaming experience. Narito kung paano ito mapapaganda tulad ng isang pro:

  • Gumamit ng Ethernet sa halip na Wi-Fi: Kung mayroon mang paggalaw na agad na nagpapabuti sa pagganap, iyon ay ang pag-plug in. Lagi nang nangunguna ang Ethernet sa Wi-Fi: hindi nangyayari ang random drops, at wala ang mga mabagal na koneksyon. Para sa maayos na Full HD o 4K streaming, ito ang pinakamahusay.

  • Mag-upgrade sa isang high-speed router: Maghanap para sa dual-band o tri-band router (2.4GHz plus 5GHz) upang hawakan ang maraming devices nang hindi nagiging congested ang koneksyon, lalo na kung nagbabahagi ka ng Wi-Fi kasama ang mga roomates o pamilya

  • Suriin ang iyong bandwidth limits: Siguraduhing may minimum na 25 Mbps na upload speed kung nag-stream ka sa 1080. Para sa 4K, 30–50 Mbps ang kailangan mo. Kung hindi ka sigurado kung anong bilis ang gamit mo, magpatakbo ng mabilis na pagkutsinta sa speed test website. Malamang na malabo ang mga bagay kung mababa ang iyong mga numero.

  • Minimize ang mga interferences sa network: Ilagay ang iyong router sa isang sentro at bukas na lugar. Huwag ilagay ito sa loob ng cabinet. Panatilihin itong malayo sa cordless phones at microwaves; ang iyong signal ay maaaring maapektuhan.

  • Idiskonekta o itigil ang mga background tasks: Isara ang auto-updates, cloud syncing (Google Drive, OneDrive), at iba pang mabigat na network tasks na maaaring kumain ng bandwidth at lumikha ng mga spike ng lag.

Bakit ang DeskIn ay ang Kaibigan ng Gamer

Ang DeskIn ay hindi lamang isa pang remote access app—ito ay dinisenyo na partikular na isipin ang mga gamer. Mula sa totoong pagganap hanggang sa cross-platform flexibility at mga tampok na matibay. Nakakabagay ito ng lahat ng mga kinakailangan para sa mga modernong gamer. at narito ang mga dahilan kung bakit ito namumukod-tangi:

ZeroSync® Engine = Ultra-Low Latency

Ang proprietary na ZeroSync® engine ng DeskIn ay gumagamit ng global edge nodes at real-time encoding optimization upang bawasan ang latency sa ibaba ng 40ms. Nangangahulugan ito na ang gameplay ay tumutugon at synced. Kung ikaw ay tumatakbo mula sa mga bala sa isang shooter o nagsasagawa ng frame-perfect combos, pinapanatili ng DeskIn na ikaw ay naka-sync.

Interactive Full HD at 4K Gaming

deskin remote gaming full hd and 4k resolution

Masiyahan sa mga kristal na malinaw na visuals na sumusuporta sa 4K 60FPS at 2K 144FPS. Tinitiyak ng DeskIn ang matitinding detalye kasama ang fluid motion, na angkop para sa kompetitibo at nakaka-engganyong gameplay.

Mga Mabibigat na Laro, Magagaan na Device

Dahil sa mataas na kahusayan sa pag-decode at pag-encode, nag-stream ang DeskIn ng mga mapaghamong laro tulad ng “Cyberpunk 2077,” “Elden Ring,” o “Death Stranding” na may makinis na frame rates at maliwanag na resolusyon, kahit na sa mga device na may minimal na specs.

Maaari mo ring gamitin ang mga pasadyang mobile control overlays kapag naa-access ang iyong PC mula sa isang telepono —suriin kung paano gamitin ang mga customized gaming keyboards at hotkeys sa mobile.

Tunay na Suporta sa Cross-Platform

Maglaro mula sa Windows, macOS, iOS, o Android. Kung gumagamit ka ng isang tablet, telepono, laptop, o desktop, nagbibigay ang DeskIn ng isang pare-pareho, makapangyarihang karanasan sa lahat ng device.

Kung ikaw ay naglalaro mula sa isang Mac, iPhone, o Android tablet, nag-aangkop ang DeskIn sa iyong setup —tingnan kung paano maglaro ng mga laro ng Windows sa isang Mac tulad ng isang pro.

Palawakin ang Iyong Game Screen

deskin remote gaming screen extension

Gawing isa pang display ang iyong Mac o iyong iPad. Ang Discord, mga game maps, at kahit na mga walkthrough ay mahusay para panatilihin sa isang screen lamang kapag ikaw ay naglalaro sa iba. Ang setup na ito ay perpekto para sa mga strategy o multitasking games.

Nais mo bang dalhin ito sa susunod na antas?Alamin kung paano i-set up ang dual monitor layout para sa gaming at mas mahusay na i-manage ang Discord, maps, o streams habang naglalaro ka.

Immersive Auto 3D Game View

deskin remote gaming 3d view

Awtomatikong kinikilala ng DeskIn ang mga First-Person (FPP) at Third-Person (TPP) na mga game mode at ina-adjust ang streaming view ayon dito. Nag.resulta ito sa isang mas nakaka-immerse, native-like remote experience kapag ikaw ay malalim sa mga action-heavy na mga laro.

I-upgrade ang Iyong Gameplay na may Pro-Level Screensharing

Ang masamang screenshare ay tiyak na makasisira sa ilang mga kamangha-manghang laro. Nasa zone ka habang ang gameplay ay tila nag-aapoy, at bigla, ang iyong stream ay nakakaranas ng ilang mga isyu. Ito ay nagiging isang pixelated mess o nagsisimulang mag-stutter. Sa ilang matalino na tweaks sa tamang setup, maaari mong i-stream ang iyong gameplay sa Full HD na may halos walang lag. Wala nang pixel soup. Wala nang stutter parties.

Ang DeskIn ay hindi lamang gumagana — ito ay itinayo upang mag-perform nang mas mahusay para sa mga gamer na nagmamalasakit sa kalidad. Kaya kung ikaw ay pagod na sa dealing with dropped frames, laggy inputs, at clunky na screen-sharing tools, oras na para mag-upgrade sa isang bagay na itinayo para sa iyong mahal: makinis, seamless gameplay na talagang mukhang kasing ganda ng pakiramdam nito.

I-click dito upang subukan ang Deskin at magsimula ng screen sharing sa tunay na Full HD

manlalaro na naglalaro sa dual monitor na may screen sharing na may full hd at mababang latency
promo ng deskin

Ano ang susunod?

How to Use AnyDesk Wake on LAN to Power On Your Remote PC

How to Use AnyDesk Wake on LAN to Power On Your Remote PC

If you want to remotely power on a sleeping computer, AnyDesk Wake on LAN can be a useful feature. It allows you to wake a device without physically pressing the power button, making remote work and system maintenance much easier.

In this guide, we'll walk through how to configure AnyDesk Wake on LAN step by step, including BIOS settings, operating system configuration, and AnyDesk options. While the process works well when everything is configured correctly, it can also involve several technical steps. That's why we'll also introduce DeskIn, a simpler and more streamlined alternative for remote access and Wake on LAN. Keep reading to learn both approaches.

What Is Wake on LAN and Why Do You Need It?

Wake on LAN is a networking feature that allows a device to be powered on remotely through a special network signal known as a "magic packet." When the sleeping computer's network card receives this packet, it sends a signal to the motherboard to start the system.

The main benefit of Wake on LAN is convenience and energy efficiency. Instead of keeping a computer running all day, you can leave it in sleep or shutdown mode and wake it only when needed. This saves electricity and extends hardware lifespan.

Another advantage is accessibility. Whether you're working from home, performing remote maintenance, or managing servers, Wake on LAN ensures devices remain reachable even when they are powered down. IT teams often rely on this capability to troubleshoot systems or perform updates without being physically present.

How to Set Up AnyDesk Wake on LAN Step by Step

Configuring AnyDesk Wake on LAN involves preparing the hardware, enabling settings in your operating system, and activating the feature in AnyDesk itself. The steps below will guide you through the process.

Step 1. Enable Wake on LAN in BIOS or UEFI

The first requirement is enabling Wake on LAN at the motherboard level.

  1. Restart your computer.

  2. Enter the BIOS or UEFI menu during startup (usually by pressing F2, DEL, or F10).

  3. Open the Power Management section.

  4. Locate a setting such as Wake on LAN, Power on by PCI-E, or similar.

  5. Enable the option.

  6. Save changes and exit the BIOS.

This step ensures the motherboard will allow network signals to power the system on.

Enable Wake on LAN in BIOS settings

Step 2. Configure the Network Adapter in Windows

Next, you need to allow the network card to receive wake signals.

  1. Open Device Manager.

  2. Expand Network Adapters.

  3. Right-click your Ethernet adapter and select Properties.

  4. Go to the Advanced tab and enable Wake on Magic Packet.

  5. Open the Power Management tab.

  6. Check Allow this device to wake the computer.

  7. Also, enable Only allow a magic packet to wake the computer.

For users running AnyDesk Wake on LAN on Windows 11 or older systems, these steps are essentially the same.

Enable Wake on Magic Packet in network adapter setting

Step 3. Disable Fast Startup (Optional but Recommended)

Some Windows systems block network wake signals due to the fast startup feature.

To disable it:

  1. Open Control Panel.

  2. Go to Power Options.

  3. Click Choose what the power buttons do.

  4. Select Change settings that are currently unavailable.

  5. Uncheck Turn on fast startup.

This step often fixes situations where AnyDesk Wake on LAN is not working even though the configuration appears correct.

Step 4. Enable Wake on LAN Inside AnyDesk

Now configure the feature inside the AnyDesk client.

  1. Open AnyDesk on the target computer.

  2. Go to Settings.

  3. Navigate to the Wake-on-LAN option.

  4. Enable Allow Wake-on-LAN.

  5. Ensure another AnyDesk device on the same network remains online.

When you try to connect to the sleeping device, AnyDesk will show a "Power On" option.

AnyDesk Power On button to trigger Wake on LAN

Step 5. Wake the Device Remotely

After completing the setup:

  1. Open AnyDesk on your remote device.

  2. Enter the address of the sleeping computer.

  3. Click Power On.

AnyDesk will locate another active device on the same network and ask it to send the wake packet.

This process is how Wake on LAN AnyDesk functions behind the scenes. If everything is configured correctly, the sleeping machine will start, and AnyDesk will automatically connect.

Troubleshooting Common Wake Issues

Sometimes you may see errors such as AnyDesk Wake on LAN no device found. This usually means there is no active device on the same network to send the magic packet. Another frequent issue is that AnyDesk Wake on LAN not working due to Wi-Fi limitations. Wake signals are most reliable over wired Ethernet connections.

If troubleshooting becomes too time-consuming, many users choose tools designed to simplify remote desktop Wake on LAN workflows.

[Bonus] Why DeskIn Is a Smarter Choice

While AnyDesk provides Wake on LAN functionality, the setup process can be technical. Users often need to adjust BIOS settings, network adapters, and device configurations before the feature works properly.

DeskIn focuses on making remote access simpler and more reliable. First, the setup process is easier. Devices linked to the same DeskIn account can be managed quickly without complex network configuration or troubleshooting steps. Second, DeskIn delivers excellent performance for remote connections. It supports high-resolution sessions, smooth frame rates, and stable connections even when accessing powerful workstations remotely. Third, DeskIn integrates device management, remote access, and connectivity tools into one platform. Instead of relying on multiple Wake on LAN software tools, users can manage everything from a single interface.

For professionals who frequently need remote access, DeskIn provides a faster and more predictable experience.

👀 You may also be interested in


FAQs About AnyDesk Wake on LAN

1. Can AnyDesk do Wake-on-LAN?

Yes. AnyDesk supports Wake on LAN as long as the hardware, operating system, and application settings are configured properly. Another device on the same network must remain active to send the wake signal.

2. How do I enable remote Wake-on-LAN?

You must enable Wake on LAN in three places: the BIOS or UEFI firmware, the operating system's network adapter settings, and the AnyDesk client configuration. Once enabled, you can wake a sleeping device remotely.

3. How does Wake on LAN work?

Wake on LAN works by sending a "magic packet" containing the device's MAC address through the network. The network card receives the packet and signals the motherboard to power the system.

H3: 4. Does Wake-on-LAN work if the computer is off?

Yes, but only if the system supports Wake on LAN from the shutdown state and still receives standby power through the network adapter. For smoother remote control workflows, many users adopt tools like DeskIn.

Conclusion

Setting up AnyDesk Wake on LAN allows you to power on a remote computer without physically accessing it. By enabling BIOS settings, configuring the network adapter, and activating the feature inside AnyDesk, you can wake sleeping machines and connect instantly.

However, the setup process can sometimes be complicated, especially when dealing with hardware compatibility or network configuration issues. If you prefer a simpler and more reliable remote access experience, DeskIn provides an excellent alternative.

With streamlined device management, stable remote sessions, and easier setup, DeskIn helps you stay connected to your computers anytime while still benefiting from the power of Wake on LAN.

TeamViewer Wake on Lan Complete Guide

How to Set Up TeamViewer Wake on LAN (Step-by-Step Complete Guide)

Turning on your computer remotely can save time, energy, and frustration. Many users rely on TeamViewer Wake on LAN to start a sleeping computer without physically pressing the power button. Whether you want to access your office PC from home or wake a server in another room, Wake on LAN makes remote work much easier.

In this guide, we'll walk through how to configure TeamViewer Wake on LAN step by step. We'll also introduce DeskIn, a simpler remote access solution that can make remote wake and control smoother and more reliable. If you've ever struggled with complicated configuration or TeamViewer Wake on LAN not working, keep reading to discover an easier approach.

What Is Wake on LAN and How Does It Work?

Wake on LAN (WoL) is a network technology that allows a computer to power on or wake from sleep when it receives a special network signal called a "magic packet." This packet is sent through the network to the computer's network interface card, which remains partially active even when the system is powered down.

When configured correctly, tools like TeamViewer send that packet from another device on the same network or through the internet. The target computer's motherboard and network adapter detect the signal and trigger the system to start up.

This process is often used for remote work, server management, or accessing a home PC while traveling. Many people combine remote desktop Wake on LAN features with remote control software so they can both power on and operate their computer from anywhere.

How to Set Up TeamViewer Wake on LAN

Setting up TeamViewer Wake on LAN involves configuring your hardware, operating system, and TeamViewer settings. Follow the steps below carefully to ensure everything works properly.

Step 1. Enable Wake on LAN in BIOS or UEFI

First, you need to activate Wake on LAN at the hardware level. Restart your computer and enter the BIOS or UEFI setup menu. This is usually done by pressing keys like F2, F12, Delete, or Esc during startup. Inside the BIOS interface, navigate to the Power Management section.

Look for an option such as Wake on LAN, Power On by PCI-E, or Resume by LAN and enable it. Save the settings and exit the BIOS. Without this configuration, no Wake on LAN software will be able to power on your computer remotely.

Enable Wake on LAN in BIOS

Step 2. Configure the Network Adapter

Next, you need to allow your network adapter to receive wake signals. Open Device Manager and locate your network adapter under the Network Adapters category. Right-click the adapter and open its Properties panel.

Configure the Network Adapter

In the Power Management tab, enable the option allowing the device to wake the computer. In the Advanced settings, ensure Wake on Magic Packet is enabled. These steps are essential for both Wake on LAN Windows 10 and Windows 11 configurations. If your adapter does not support WoL, the feature will not work.

Step 3. Disable Fast Startup in Windows

Windows Fast Startup can sometimes interfere with WoL signals. Open Control Panel, go to Power Options, and locate the settings for what the power button does. From there, disable the fast startup feature and save your changes. This small adjustment often fixes problems when Wake on LAN Windows 11 or older Windows versions fail to respond to wake requests.

If these configuration steps start to feel complex, this is where DeskIn stands out. DeskIn integrates remote wake and remote access into a more streamlined workflow with fewer configuration hurdles.

Step 4. Install TeamViewer and Assign the Device

To use TeamViewer Wake on LAN, your computer must be linked to your TeamViewer account. Install the TeamViewer Host application on the computer you want to wake remotely. After installation, sign in and assign the device to your TeamViewer account. Once the computer appears in your device list, you will be able to configure wake options and manage the device remotely.

install TeamViewer

Step 5. Configure Wake on LAN in TeamViewer

Now you can configure the WoL settings inside TeamViewer. Open the application settings. Under the Device menu, go to Network, click Wake-on-LAN, click "Other TeamViewer within your local network", enter the TeamViewer ID of the device waking up the remote computer, click "Add...", and confirm by clicking "OK".

Configure Wake on LAN in TeamViewer

Step 6. Wake the Computer Remotely

After configuration, open your TeamViewer device list. Locate the offline computer and select the option to wake it. TeamViewer will send a magic packet through the network and start the remote computer. This method works on different systems, including TeamViewer Wake on LAN Mac, although Mac devices typically only wake from sleep mode rather than from a full shutdown.

If the device does not wake up, the issue may relate to network configuration, router settings, or incorrect BIOS settings. Many users searching for Wake on LAN not working run into these common problems.

[Bonus] Why DeskIn Is a Better Choice

Best Wake on LAN Software DeskIn

While TeamViewer Wake on LAN works for many users, the setup process can be complicated. BIOS configuration, network adapter settings, and router port forwarding can make the process frustrating.

DeskIn offers a more streamlined approach for Wake on LAN and device management. Instead of juggling multiple configuration layers, DeskIn focuses on simplicity and reliability. Once your devices are connected to the same account, you can quickly access and manage them from anywhere without dealing with complicated networking rules. Another advantage is performance. DeskIn supports high-resolution remote sessions with smooth frame delivery, making it suitable not only for office work but also for creative tasks and high-performance workflows. This means you can wake your device, connect instantly, and continue working without interruptions.

DeskIn also integrates device management and remote control into one unified platform. Instead of using separate tools for wake, connection, and control, everything is handled in one place, which reduces troubleshooting time and improves reliability for daily remote work. If you frequently rely on remote desktop Wake on LAN functionality, DeskIn can provide a smoother and more predictable experience compared to traditional setups.

Want to see a detailed DeskIn walkthrough? Read our complete guide on setting up Wake on LAN.

👀 You may also be interested in:

FAQs about TeamViewer Wake on LAN

1. How to Wake-on-LAN with TeamViewer?

To use Wake on LAN with TeamViewer, you must enable Wake on LAN in BIOS, configure the network adapter, install TeamViewer Host, and set up the WoL settings in the application.

2. Is TeamViewer Wake on LAN free?

Many users ask if TeamViewer Wake on LAN is free. The feature is available in TeamViewer, but commercial usage may require a paid license depending on how the software is used.

3. How do I enable remote Wake-on-LAN?

To enable remote wake functionality, the target computer must support Wake on LAN, be connected via Ethernet, and have WoL activated in both hardware and operating system settings.

4. What if TeamViewer Wake on LAN is not working?

If TeamViewer Wake on LAN is not working, check BIOS settings, network adapter configuration, router port forwarding, and Windows power settings. If the process becomes too complicated, solutions like DeskIn provide simpler remote access alternatives.

Conclusion

Setting up TeamViewer Wake on LAN allows you to power on your computer remotely and access it whenever needed. By enabling Wake on LAN in BIOS, configuring your network adapter, and linking the device to TeamViewer, you can wake your PC from another device across the network.

However, the configuration process can sometimes be complex, especially when dealing with router settings or troubleshooting wake failures. If you want a more streamlined remote access experience, DeskIn offers a powerful alternative with smoother connectivity and easier device management. With DeskIn, you can spend less time configuring systems and more time getting work done remotely.

Chrome Remote Desktop and setup guide

How to Set Up & Use Chrome Remote Desktop: Complete Beginner's Guide | DeskIn Japan

This article walks through the basic setup and features of Chrome Remote Desktop (CRD), Google's free remote access tool — explained clearly for first-time users.

CRD is free, simple to configure, and integrates smoothly with your existing Google account and Chrome browser. It works across Windows, Mac, and smartphones, making it easy to get started with remote access from virtually any device.

For everyday personal use and one-off remote support sessions, it's an excellent option — though its features are limited to "Remote Access" and "Remote Support." For more advanced requirements — 4K display quality, low latency, or stable connections inside Japanese corporate networks — a professional-grade tool like DeskIn is worth considering.


Introduction

What Is Chrome Remote Desktop?

Chrome Remote Desktop (CRD) is a free remote access tool developed by Google. All you need is the Chrome browser and a Google account to remotely control another PC over the internet, from anywhere. No additional hardware is required, making it one of the most accessible ways to get started with remote desktop access.

Why Remote Desktop Is Useful in Japan

Hybrid work has become a fixture across Japan's working culture. Many companies — especially in Tokyo and other major cities — now expect employees to split their time between the office and home. Students, too, often find themselves needing access to files or software left behind on a home PC. And for those who have just joined the workforce as shinshakajin (新社会人 — literally "new members of society," the term for fresh graduates entering their first job, typically in April when Japan's fiscal and academic year begins), juggling unfamiliar tools across multiple environments can be genuinely stressful. Chrome Remote Desktop offers a practical, low-barrier solution for all of these situations.

Recommended Reads:
Which One Is Better, Chrome Remote Desktop Or Microsoft Remote Desktop?

Chrome Remote Desktop's Two Core Features

  1. Remote Access — Connect to Your Own Devices, Anytime

The "Remote Access" feature lets you connect to your home or office PC from any location, at any time. Once the host machine is configured, you can control it remotely as long as it's powered on — even if no one is sitting in front of it. This is ideal for pulling up a file you left on your home PC while you're at school or the office, or for using your full desktop environment from a laptop while you're out.

  1. Remote Support — Temporary Screen Sharing for Troubleshooting

The "Remote Support" feature is built for one-off, temporary sessions. By sharing a connection code, you can let someone else view or control your screen — or do the same for them — without exchanging account credentials. It's a clean and simple way to help a classmate, colleague, or family member work through a technical issue remotely.

Chrome Remote Desktop is designed specifically around these two functions. That focused scope makes it particularly easy to pick up, even if you've never used a remote desktop tool before.

Chrome Remote Desktop feature switching

What You'll Need Before Getting Started

A Google Account

A Google account is required. If you don't already have one, register before you begin. If you're already using Gmail or Google Drive, that same account will work here.

Google Chrome Browser

CRD runs inside the Chrome browser, so Chrome needs to be installed on both the host (the PC you want to access remotely) and the client (the device you're connecting from). Chrome can be installed alongside any other browser without conflict.

A Stable Internet Connection

Remote desktop transmits live screen data over the internet, so a reliable connection on both ends matters. If your Wi-Fi is inconsistent, a wired connection will generally produce a much smoother experience.

Step-by-Step Setup Guide

Setting Up the Host PC (the Computer You Want to Control)

Start by configuring Chrome Remote Desktop on the machine you'll be accessing remotely.

  1. Open Google Chrome and navigate to the Chrome Remote Desktop page.

  2. Follow the on-screen prompts to add the extension and complete the installation.

Chrome Remote Desktop addition and installation procedure
  1. Enable "Remote Access" and follow the steps to set a PIN code of at least six digits.

  2. Once setup is complete, this PC will appear in your list of remotely accessible devices.

Connecting from the Client Device (the Device You're Using to Connect)

Next, prepare the device you'll be connecting from.

  1. Log into Chrome with the same Google account and open the Chrome Remote Desktop page.

  2. Select the host PC from your device list.

Chrome Remote Desktop device connection screen
  1. If connecting from a smartphone or tablet, download the dedicated iOS or Android app and select your target PC from within the app.

Authenticating with Your PIN Code

After selecting the host PC, you'll be prompted to enter your PIN to verify the connection.

  1. Enter the PIN you created during setup on the client device.

  2. Once authenticated, the host PC's screen will appear on your device and you'll be able to control it with your mouse and keyboard.

  3. The connection is encrypted and can be ended at any time.

Tips for Getting More Out of CRD

Make the Most of Keyboard Shortcuts

Using keyboard shortcuts deliberately can make a real difference to your efficiency in a remote session. This is especially worth thinking about if you're switching between Windows and Mac, where key behaviour differs — particularly around:

  • The difference between the Ctrl and Cmd keys

  • Full-screen toggling and window switching

Familiarising yourself with these basics in advance will help things feel more natural. If shortcuts are being captured by your local device instead of reaching the remote machine, check the settings for an option like "Send all keyboard input to remote" — this is usually the fix.

Using CRD on Mobile: What to Expect

The mobile experience differs quite a bit from working on a desktop. Chrome Remote Desktop's mobile app is built around touch controls:

  • Swipe to move the mouse cursor

  • Pinch to zoom in or out

  • Toolbar at the bottom of the screen to access the keyboard and menu

Precise input — longer text entry, drag-and-drop, clicking small targets — is slower and more effortful on mobile than on a PC. In practice, mobile access works best for quick checks and light tasks. For anything more involved, a laptop or desktop will serve you much better.

Chrome Remote Desktop smartphone operation image

The Limitations of Chrome Remote Desktop

Simplicity Has Its Ceiling

Chrome Remote Desktop is, at its core, a tool built for "Remote Access" and "Remote Support" — nothing more. That focus is part of what makes it easy to use, but it also means that more specialised requirements hit a wall fast. If you need to transfer large files quickly, manage multiple users or devices, or keep detailed logs of remote sessions, you'll find CRD doesn't have the tools for the job.

Instability Inside Japanese Corporate Networks

Many Japanese companies — particularly larger organisations — maintain strict internal network environments managed by their IT departments (joho shisutemu-bu, 情報システム部). Firewalls, proxy settings, and restrictions on Google services are common, particularly in finance, manufacturing, and government-adjacent industries. In these environments, Chrome Remote Desktop connections can become unreliable, suffer significant lag, or fail entirely.

If you've started a new job in Japan and found that CRD simply won't connect from the office network, this is almost certainly why.

Network latency and firewall restrictions image

Dependency on Your Google Account

Because CRD is tied to a Google account, any disruption to that account — a forgotten password, an account lock, or a multi-factor authentication hiccup — directly affects your ability to access remote machines. For personal use this is manageable, but for anything business-critical, it's a meaningful single point of failure.

Ready for More? Meet DeskIn — A Professional Remote Desktop Solution

The Natural Next Step Up from CRD

Chrome Remote Desktop is a solid starting point, but as remote work needs become more regular and more demanding, many users find themselves running up against its limits. For those who need a more robust, feature-rich tool suited to daily professional use, DeskIn is the obvious step up.

Built to Handle Japan's Corporate Network Environments

DeskIn is engineered for stability in complex network setups — including the kind of strict firewalls and proxy configurations common in Japanese corporate IT infrastructure. Where CRD struggles in these environments, DeskIn is designed to maintain consistent, low-latency connections even under restrictive conditions.

Image comparison of image quality between Chrome Remote Desktop and Deskin

Professional Performance and an Intuitive Workflow

DeskIn supports 4K display quality and ultra-low-latency response, with a dedicated desktop client that isn't dependent on a browser. For creative work, detailed tasks, or simply getting through a full working day remotely without friction, this level of performance makes a tangible difference. 

→ Try DeskIn for free and explore what's possible

Summary

Chrome Remote Desktop is a free, easy-to-use tool that works well for personal use, occasional remote access, and basic screen sharing. If you're new to remote desktop tools — or if you just need a quick, no-cost way to access your own PC remotely — CRD is a perfectly reasonable place to start.

For day-to-day professional use in Japan, however, particularly within corporate network environments or when you need reliable performance and high display quality, CRD will likely fall short. In those cases, transitioning to or pairing CRD with a tool like DeskIn will give you a remote setup that's genuinely fit for purpose.

Recommended Reads:
9 Benefits of Remote Access & Best Practices for Modern Life

How to Use AnyDesk Wake on LAN to Power On Your Remote PC

How to Use AnyDesk Wake on LAN to Power On Your Remote PC

If you want to remotely power on a sleeping computer, AnyDesk Wake on LAN can be a useful feature. It allows you to wake a device without physically pressing the power button, making remote work and system maintenance much easier.

In this guide, we'll walk through how to configure AnyDesk Wake on LAN step by step, including BIOS settings, operating system configuration, and AnyDesk options. While the process works well when everything is configured correctly, it can also involve several technical steps. That's why we'll also introduce DeskIn, a simpler and more streamlined alternative for remote access and Wake on LAN. Keep reading to learn both approaches.

What Is Wake on LAN and Why Do You Need It?

Wake on LAN is a networking feature that allows a device to be powered on remotely through a special network signal known as a "magic packet." When the sleeping computer's network card receives this packet, it sends a signal to the motherboard to start the system.

The main benefit of Wake on LAN is convenience and energy efficiency. Instead of keeping a computer running all day, you can leave it in sleep or shutdown mode and wake it only when needed. This saves electricity and extends hardware lifespan.

Another advantage is accessibility. Whether you're working from home, performing remote maintenance, or managing servers, Wake on LAN ensures devices remain reachable even when they are powered down. IT teams often rely on this capability to troubleshoot systems or perform updates without being physically present.

How to Set Up AnyDesk Wake on LAN Step by Step

Configuring AnyDesk Wake on LAN involves preparing the hardware, enabling settings in your operating system, and activating the feature in AnyDesk itself. The steps below will guide you through the process.

Step 1. Enable Wake on LAN in BIOS or UEFI

The first requirement is enabling Wake on LAN at the motherboard level.

  1. Restart your computer.

  2. Enter the BIOS or UEFI menu during startup (usually by pressing F2, DEL, or F10).

  3. Open the Power Management section.

  4. Locate a setting such as Wake on LAN, Power on by PCI-E, or similar.

  5. Enable the option.

  6. Save changes and exit the BIOS.

This step ensures the motherboard will allow network signals to power the system on.

Enable Wake on LAN in BIOS settings

Step 2. Configure the Network Adapter in Windows

Next, you need to allow the network card to receive wake signals.

  1. Open Device Manager.

  2. Expand Network Adapters.

  3. Right-click your Ethernet adapter and select Properties.

  4. Go to the Advanced tab and enable Wake on Magic Packet.

  5. Open the Power Management tab.

  6. Check Allow this device to wake the computer.

  7. Also, enable Only allow a magic packet to wake the computer.

For users running AnyDesk Wake on LAN on Windows 11 or older systems, these steps are essentially the same.

Enable Wake on Magic Packet in network adapter setting

Step 3. Disable Fast Startup (Optional but Recommended)

Some Windows systems block network wake signals due to the fast startup feature.

To disable it:

  1. Open Control Panel.

  2. Go to Power Options.

  3. Click Choose what the power buttons do.

  4. Select Change settings that are currently unavailable.

  5. Uncheck Turn on fast startup.

This step often fixes situations where AnyDesk Wake on LAN is not working even though the configuration appears correct.

Step 4. Enable Wake on LAN Inside AnyDesk

Now configure the feature inside the AnyDesk client.

  1. Open AnyDesk on the target computer.

  2. Go to Settings.

  3. Navigate to the Wake-on-LAN option.

  4. Enable Allow Wake-on-LAN.

  5. Ensure another AnyDesk device on the same network remains online.

When you try to connect to the sleeping device, AnyDesk will show a "Power On" option.

AnyDesk Power On button to trigger Wake on LAN

Step 5. Wake the Device Remotely

After completing the setup:

  1. Open AnyDesk on your remote device.

  2. Enter the address of the sleeping computer.

  3. Click Power On.

AnyDesk will locate another active device on the same network and ask it to send the wake packet.

This process is how Wake on LAN AnyDesk functions behind the scenes. If everything is configured correctly, the sleeping machine will start, and AnyDesk will automatically connect.

Troubleshooting Common Wake Issues

Sometimes you may see errors such as AnyDesk Wake on LAN no device found. This usually means there is no active device on the same network to send the magic packet. Another frequent issue is that AnyDesk Wake on LAN not working due to Wi-Fi limitations. Wake signals are most reliable over wired Ethernet connections.

If troubleshooting becomes too time-consuming, many users choose tools designed to simplify remote desktop Wake on LAN workflows.

[Bonus] Why DeskIn Is a Smarter Choice

While AnyDesk provides Wake on LAN functionality, the setup process can be technical. Users often need to adjust BIOS settings, network adapters, and device configurations before the feature works properly.

DeskIn focuses on making remote access simpler and more reliable. First, the setup process is easier. Devices linked to the same DeskIn account can be managed quickly without complex network configuration or troubleshooting steps. Second, DeskIn delivers excellent performance for remote connections. It supports high-resolution sessions, smooth frame rates, and stable connections even when accessing powerful workstations remotely. Third, DeskIn integrates device management, remote access, and connectivity tools into one platform. Instead of relying on multiple Wake on LAN software tools, users can manage everything from a single interface.

For professionals who frequently need remote access, DeskIn provides a faster and more predictable experience.

👀 You may also be interested in


FAQs About AnyDesk Wake on LAN

1. Can AnyDesk do Wake-on-LAN?

Yes. AnyDesk supports Wake on LAN as long as the hardware, operating system, and application settings are configured properly. Another device on the same network must remain active to send the wake signal.

2. How do I enable remote Wake-on-LAN?

You must enable Wake on LAN in three places: the BIOS or UEFI firmware, the operating system's network adapter settings, and the AnyDesk client configuration. Once enabled, you can wake a sleeping device remotely.

3. How does Wake on LAN work?

Wake on LAN works by sending a "magic packet" containing the device's MAC address through the network. The network card receives the packet and signals the motherboard to power the system.

H3: 4. Does Wake-on-LAN work if the computer is off?

Yes, but only if the system supports Wake on LAN from the shutdown state and still receives standby power through the network adapter. For smoother remote control workflows, many users adopt tools like DeskIn.

Conclusion

Setting up AnyDesk Wake on LAN allows you to power on a remote computer without physically accessing it. By enabling BIOS settings, configuring the network adapter, and activating the feature inside AnyDesk, you can wake sleeping machines and connect instantly.

However, the setup process can sometimes be complicated, especially when dealing with hardware compatibility or network configuration issues. If you prefer a simpler and more reliable remote access experience, DeskIn provides an excellent alternative.

With streamlined device management, stable remote sessions, and easier setup, DeskIn helps you stay connected to your computers anytime while still benefiting from the power of Wake on LAN.

TeamViewer Wake on Lan Complete Guide

How to Set Up TeamViewer Wake on LAN (Step-by-Step Complete Guide)

Turning on your computer remotely can save time, energy, and frustration. Many users rely on TeamViewer Wake on LAN to start a sleeping computer without physically pressing the power button. Whether you want to access your office PC from home or wake a server in another room, Wake on LAN makes remote work much easier.

In this guide, we'll walk through how to configure TeamViewer Wake on LAN step by step. We'll also introduce DeskIn, a simpler remote access solution that can make remote wake and control smoother and more reliable. If you've ever struggled with complicated configuration or TeamViewer Wake on LAN not working, keep reading to discover an easier approach.

What Is Wake on LAN and How Does It Work?

Wake on LAN (WoL) is a network technology that allows a computer to power on or wake from sleep when it receives a special network signal called a "magic packet." This packet is sent through the network to the computer's network interface card, which remains partially active even when the system is powered down.

When configured correctly, tools like TeamViewer send that packet from another device on the same network or through the internet. The target computer's motherboard and network adapter detect the signal and trigger the system to start up.

This process is often used for remote work, server management, or accessing a home PC while traveling. Many people combine remote desktop Wake on LAN features with remote control software so they can both power on and operate their computer from anywhere.

How to Set Up TeamViewer Wake on LAN

Setting up TeamViewer Wake on LAN involves configuring your hardware, operating system, and TeamViewer settings. Follow the steps below carefully to ensure everything works properly.

Step 1. Enable Wake on LAN in BIOS or UEFI

First, you need to activate Wake on LAN at the hardware level. Restart your computer and enter the BIOS or UEFI setup menu. This is usually done by pressing keys like F2, F12, Delete, or Esc during startup. Inside the BIOS interface, navigate to the Power Management section.

Look for an option such as Wake on LAN, Power On by PCI-E, or Resume by LAN and enable it. Save the settings and exit the BIOS. Without this configuration, no Wake on LAN software will be able to power on your computer remotely.

Enable Wake on LAN in BIOS

Step 2. Configure the Network Adapter

Next, you need to allow your network adapter to receive wake signals. Open Device Manager and locate your network adapter under the Network Adapters category. Right-click the adapter and open its Properties panel.

Configure the Network Adapter

In the Power Management tab, enable the option allowing the device to wake the computer. In the Advanced settings, ensure Wake on Magic Packet is enabled. These steps are essential for both Wake on LAN Windows 10 and Windows 11 configurations. If your adapter does not support WoL, the feature will not work.

Step 3. Disable Fast Startup in Windows

Windows Fast Startup can sometimes interfere with WoL signals. Open Control Panel, go to Power Options, and locate the settings for what the power button does. From there, disable the fast startup feature and save your changes. This small adjustment often fixes problems when Wake on LAN Windows 11 or older Windows versions fail to respond to wake requests.

If these configuration steps start to feel complex, this is where DeskIn stands out. DeskIn integrates remote wake and remote access into a more streamlined workflow with fewer configuration hurdles.

Step 4. Install TeamViewer and Assign the Device

To use TeamViewer Wake on LAN, your computer must be linked to your TeamViewer account. Install the TeamViewer Host application on the computer you want to wake remotely. After installation, sign in and assign the device to your TeamViewer account. Once the computer appears in your device list, you will be able to configure wake options and manage the device remotely.

install TeamViewer

Step 5. Configure Wake on LAN in TeamViewer

Now you can configure the WoL settings inside TeamViewer. Open the application settings. Under the Device menu, go to Network, click Wake-on-LAN, click "Other TeamViewer within your local network", enter the TeamViewer ID of the device waking up the remote computer, click "Add...", and confirm by clicking "OK".

Configure Wake on LAN in TeamViewer

Step 6. Wake the Computer Remotely

After configuration, open your TeamViewer device list. Locate the offline computer and select the option to wake it. TeamViewer will send a magic packet through the network and start the remote computer. This method works on different systems, including TeamViewer Wake on LAN Mac, although Mac devices typically only wake from sleep mode rather than from a full shutdown.

If the device does not wake up, the issue may relate to network configuration, router settings, or incorrect BIOS settings. Many users searching for Wake on LAN not working run into these common problems.

[Bonus] Why DeskIn Is a Better Choice

Best Wake on LAN Software DeskIn

While TeamViewer Wake on LAN works for many users, the setup process can be complicated. BIOS configuration, network adapter settings, and router port forwarding can make the process frustrating.

DeskIn offers a more streamlined approach for Wake on LAN and device management. Instead of juggling multiple configuration layers, DeskIn focuses on simplicity and reliability. Once your devices are connected to the same account, you can quickly access and manage them from anywhere without dealing with complicated networking rules. Another advantage is performance. DeskIn supports high-resolution remote sessions with smooth frame delivery, making it suitable not only for office work but also for creative tasks and high-performance workflows. This means you can wake your device, connect instantly, and continue working without interruptions.

DeskIn also integrates device management and remote control into one unified platform. Instead of using separate tools for wake, connection, and control, everything is handled in one place, which reduces troubleshooting time and improves reliability for daily remote work. If you frequently rely on remote desktop Wake on LAN functionality, DeskIn can provide a smoother and more predictable experience compared to traditional setups.

Want to see a detailed DeskIn walkthrough? Read our complete guide on setting up Wake on LAN.

👀 You may also be interested in:

FAQs about TeamViewer Wake on LAN

1. How to Wake-on-LAN with TeamViewer?

To use Wake on LAN with TeamViewer, you must enable Wake on LAN in BIOS, configure the network adapter, install TeamViewer Host, and set up the WoL settings in the application.

2. Is TeamViewer Wake on LAN free?

Many users ask if TeamViewer Wake on LAN is free. The feature is available in TeamViewer, but commercial usage may require a paid license depending on how the software is used.

3. How do I enable remote Wake-on-LAN?

To enable remote wake functionality, the target computer must support Wake on LAN, be connected via Ethernet, and have WoL activated in both hardware and operating system settings.

4. What if TeamViewer Wake on LAN is not working?

If TeamViewer Wake on LAN is not working, check BIOS settings, network adapter configuration, router port forwarding, and Windows power settings. If the process becomes too complicated, solutions like DeskIn provide simpler remote access alternatives.

Conclusion

Setting up TeamViewer Wake on LAN allows you to power on your computer remotely and access it whenever needed. By enabling Wake on LAN in BIOS, configuring your network adapter, and linking the device to TeamViewer, you can wake your PC from another device across the network.

However, the configuration process can sometimes be complex, especially when dealing with router settings or troubleshooting wake failures. If you want a more streamlined remote access experience, DeskIn offers a powerful alternative with smoother connectivity and easier device management. With DeskIn, you can spend less time configuring systems and more time getting work done remotely.

Huwag palampasin.

Huwag palampasin.

Contact Us

Email: support@deskin.io

Office: 991D Alexandra Road #02-17, Singapore 119972

Copyright © 2026 Zuler Technology PTE. LTD. All rights reserved.

Contact Us

support@deskin.io

991D Alexandra Road #02-17

Singapore 119972

Copyright © 2026 Zuler Technology PTE. LTD. All rights reserved.

Contact Us

Email: support@deskin.io

Office: 991D Alexandra Road #02-17, Singapore 119972

Copyright © 2026 Zuler Technology PTE. LTD. All rights reserved.