Cách Ennead Architects đạt được thiết kế từ xa 4K và năng suất gấp 2 lần với DeskIn

Benjamin Lee

Năng suất

Đã cập nhật

24 thg 6, 2025

Công ty thiết kế kiến trúc Ennead (trước đây được biết đến với tên Polshek Partnership) là một công ty kiến trúc có trụ sở tại New York, chuyên tạo ra các thiết kế sáng tạo và bền vững cho nhiều loại dự án, bao gồm các tổ chức văn hóa, giáo dục và khoa học.

Công ty được thành lập vào năm 1963 và đã hoàn thành nhiều dự án nổi bật trong nhiều năm qua, bao gồm Rose Center for Earth and Space tại Bảo tàng Lịch sử Tự nhiên Hoa Kỳ ở New York, Bảo tàng Lịch sử Tự nhiên Utah và Standard Hotel tại khu Meatpacking của New York.

Ennead Architectural Design cũng tham gia vào một số dự án trùng tu và cải tạo quy mô lớn, bao gồm trùng tu Carnegie Hall và cải tạo Louis Gallery tại Bảo tàng Nghệ thuật Đại học Yale.

Ennead Architectural Design có cam kết mạnh mẽ trong việc tạo ra những công trình có ý nghĩa kiến trúc và tác động xã hội trên toàn thế giới.

Sự chuyển dịch sang làm việc từ xa trong và sau đại dịch

Giống như nhiều công ty khác trong ngành kiến trúc và thiết kế, Ennead đã bị ảnh hưởng bởi đại dịch COVID-19 và các hạn chế đi kèm đối với công việc trực tiếp. Việc chuyển sang làm việc từ xa khiến nhân viên Ennead gặp nhiều khó khăn hơn trong việc cộng tác hiệu quả và truy cập vào văn phòng máy tính hiệu năng cao cùng các công cụ bản vẽ của công ty.

Bất chấp những thách thức, Ennead đã thể hiện khả năng phục hồi và thích ứng trước đại dịch. Ennead đã sử dụng DeskIn Enterprise Edition để giúp họ hoàn thành các bản vẽ thiết kế từ xa và mô phỏng trong thời gian đại dịch.

DeskIn là một nền tảng dựa trên đám mây cho phép truy cập từ xa vào máy tính và ứng dụng hiệu năng cao, đặc biệt hữu ích cho các ngành như kiến trúc và thiết kế, nơi thường yêu cầu năng lực tính toán cao.

Bằng cách sử dụng DeskIn, Ennead đã có thể cung cấp cho nhân viên quyền truy cập từ xa vào văn phòng máy tính hiệu năng cao và các công cụ bản vẽ của công ty, cho phép họ thực hiện bản vẽ thiết kế và mô phỏng từ bất kỳ đâu với trải nghiệm ổn định, độ nét cao và mượt mà.

Điều này giúp họ tiếp tục làm việc với các dự án mà không bị giới hạn bởi các phương thức truy cập từ xa truyền thống như VPN, đồng thời tiếp tục mang lại các dự án đổi mới và có tác động dù gặp trở ngại do đại dịch gây ra.

Ennead sử dụng DeskIn không chỉ để truy cập từ xa vào năng lực tính toán hiệu năng cao mà còn để tích hợp và tối ưu hóa quy trình kinh doanh, cũng như quản lý hiệu quả công việc ngoài văn phòng trong thời gian đại dịch.

Ennead used DeskIn to integrate and optimize their business processes

Những trở ngại mà đội ngũ Ennead gặp phải khi làm việc ở nhiều khu vực địa lý

Các nhóm Ennead đặc biệt phụ thuộc vào năng lực tính toán hiệu năng cao và các ứng dụng phần mềm chuyên dụng. Việc các công ty kiến trúc và thiết kế trang bị cho đội ngũ sản xuất các workstation chuyên nghiệp là điều phổ biến, vì chúng cung cấp hiệu năng và sức mạnh cần thiết để chạy các ứng dụng thiết kế chuyên sâu, 3D và hiệu ứng đặc biệt.

Tuy nhiên, khi nhân viên làm việc tại nhà trong đại dịch, máy tính cá nhân của họ có thể không đủ hiệu năng cần thiết để chạy hiệu quả các ứng dụng này. Sự phân tán do làm việc tại nhà cũng có thể khiến việc quản lý và giám sát các workstation của nhân viên trở nên khó khăn hơn, làm tình hình càng phức tạp.

DeskIn's high performance makes it applicable for extended business cases

Hợp tác với DeskIn

Việc triển khai DeskIn tại Ennead đã tạo ra tác động tích cực đến năng lực làm việc từ xa của công ty và giúp vượt qua các thách thức khi làm việc trong đại dịch. Ngoài việc cung cấp quyền truy cập từ xa vào các workstation hiệu năng cao và ứng dụng chuyên dụng, DeskIn cũng hữu ích cho bảo mật dữ liệu dự án, cộng tác quy trình, phát triển công nghệ và các lĩnh vực khác.

Thành công của DeskIn tại Ennead đã khiến công ty tiếp tục sử dụng nền tảng này ngay cả sau khi dịch bệnh lắng xuống. Sự tiện lợi khi làm việc mọi lúc, mọi nơi đã mang lại lợi ích đáng kể cho nhân viên Ennead, và công ty đã nhận thấy giá trị của làm việc từ xa và cộng tác.

Bằng cách mở rộng quy mô sử dụng DeskIn, Ennead có thể tiếp tục nâng cao năng lực làm việc từ xa và cộng tác.

Triển khai nhanh chóng để chuyển đổi liền mạch sang làm việc từ xa

Khi ennead mua DeskIn Enterprise, một số nhân viên đã phải cách ly tại nhà, khiến công ty có rất ít thời gian để triển khai sản phẩm.

Với tính năng triển khai hàng loạt của DeskIn Enterprise, quản trị viên CNTT có thể cài đặt và cấu hình tất cả thiết bị doanh nghiệp trong vòng một giờ. Mã triển khai dành riêng cho sản phẩm cũng có thể mang theo thông tin nhóm thiết bị, loại bỏ nhu cầu quản trị viên phải quản lý nhóm thiết bị thủ công, và tự động liên kết workstation với các phòng ban tương ứng chỉ thông qua dòng lệnh.

Điều này có nghĩa là đối với nhân viên, họ chỉ cần tải xuống ứng dụng DeskIn, đăng nhập, rồi có thể tìm thấy thiết bị của công ty trong danh sách thiết bị. Khi bắt đầu kết nối từ xa, họ có thể truy cập liền mạch vào workstation từ xa, và trải nghiệm không khác gì làm việc tại chỗ. Họ có thể sử dụng workstation như thể đang có mặt trực tiếp tại văn phòng, không có khác biệt đáng kể về hiệu năng hay độ phản hồi.

Tính đơn giản và dễ sử dụng của DeskIn là những đặc điểm then chốt khiến nền tảng này hấp dẫn đối với nhân viên Ennead. Nền tảng loại bỏ nhu cầu cấu hình hoặc thiết lập phức tạp, cho phép nhân viên tập trung vào công việc và làm việc hiệu quả từ bất kỳ địa điểm nào.

Với DeskIn, họ có thể chuyển đổi liền mạch giữa làm việc văn phòng từ xa và vẽ từ xa mà không cần bất kỳ cấu hình bổ sung nào, từ đó tăng thêm năng suất và hiệu quả.

Thiết kế từ xa xuyên không gian và tăng gấp đôi hiệu quả cộng tác

Để đáp ứng tốt hơn nhu cầu công việc chuyên môn của đội ngũ thiết kế, DeskIn được trang bị nhiều chức năng điều khiển từ xa phong phú và thiết thực. Ngoài các chức năng từ xa cơ bản như truyền tệp, giao tiếp trực tuyến bằng bảng trắng, chiếu màn hình từ xa, camera từ xa, in từ xa, ánh xạ chuột và bàn phím, thiết lập watermark sáng và tối, v.v., DeskIn còn phát triển riêng các chức năng plug-in chuyên nghiệp như bảng vẽ bút, chế độ màu thực, chế độ hiệu năng cao và thao tác đa màn hình.

Các kiến trúc sư và nhà thiết kế có thể điều khiển máy tính cấu hình cao của công ty để xử lý thiết kế siêu rõ thông qua bảng vẽ ngoài/bảng vẽ tay kịp thời, với chế độ hiệu năng cao và màu thực lên đến 4K60 khung hình, đồng thời tận hưởng trải nghiệm điều khiển từ xa đồ họa độ nét cao và cực kỳ mượt mà.

Dedicated high-speed lines for DeskIn enterprice client

Đánh giá từ xa được hỗ trợ bởi chức năng đa điều khiển của DeskIn

1. Các tác phẩm nghệ thuật lớn thường không dễ truyền tải, thao tác từ xa không cần truyền nén, không chỉ tiết kiệm đáng kể thời gian chờ sao chép và truyền tải mà còn chặn rủi ro rò rỉ tệp ngay từ nguồn.

2. Khi nhà thiết kế, họa viên và trưởng dự án cùng lúc kết nối đến máy tính chứa tệp dự án, họ có thể vừa xem vừa chỉnh sửa trong khi trao đổi, loại bỏ khoảng trống thông tin trong làm việc từ xa.

Trong các trường hợp hoàn thiện phương án và các tình huống khác cần chuyển tệp, DeskIn Enterprise Edition cũng cung cấp phương thức truyền tệp cực kỳ an toàn: tệp chỉ có thể được chuyển tới máy tính công ty trong danh sách thiết bị, tất cả bản ghi truyền đều được lưu chi tiết, và toàn bộ quy trình có thể được kiểm soát và truy vết, đảm bảo nhà quản lý doanh nghiệp và nhân viên có thể sử dụng thoải mái và yên tâm.

Nhấp vào đây để tải xuống DeskIn Enterprise

Ennead Architectural Design có cam kết mạnh mẽ trong việc tạo ra những công trình có ý nghĩa kiến trúc và tác động xã hội trên toàn thế giới.

Sự chuyển dịch sang làm việc từ xa trong và sau đại dịch

Những trở ngại mà đội ngũ Ennead gặp phải khi làm việc ở nhiều khu vực địa lý

Hợp tác với DeskIn

Bằng cách mở rộng quy mô sử dụng DeskIn, Ennead có thể tiếp tục nâng cao năng lực làm việc từ xa và cộng tác.

Triển khai nhanh chóng để chuyển đổi liền mạch sang làm việc từ xa

Khi ennead mua DeskIn Enterprise, một số nhân viên đã phải cách ly tại nhà, khiến công ty có rất ít thời gian để triển khai sản phẩm.

Thiết kế từ xa xuyên không gian và tăng gấp đôi hiệu quả cộng tác

Đánh giá từ xa được hỗ trợ bởi chức năng đa điều khiển của DeskIn

Nhấp vào đây để tải xuống DeskIn Enterprise

Cách Ennead Architects đạt được thiết kế từ xa 4K và năng suất gấp 2 lần với DeskIn

Tiếp theo là gì?

Xem tất cả

Controlling a Windows PC from an iPad using Chrome Remote Desktop in Japan

Control Windows from Your iPad Using Chrome Remote Desktop: Tips & Limits | DeskIn Japan

Can an iPad Actually Replace a Windows PC?

You're settled into a café in Shimokitazawa or a co-working space in Shinjuku, iPad in hand, no laptop in sight. It sounds ideal — until you need full Excel functionality, a Windows-only business application, or software sitting on the office PC back at your desk.

For many people living and working in Japan, this situation comes up more often than expected. The answer is remote desktop access — specifically, using your iPad to connect to and control a Windows PC from wherever you are.

Why Chrome Remote Desktop Is the First Option Most People Try

Among the remote desktop tools available, Google's Chrome Remote Desktop (CRD) consistently gets chosen as the starting point. It's completely free, requires no technical background to set up, and works across devices. For anyone wanting to test the concept before committing to a paid tool, it's the natural first step.

But Knowing the Tricks — and the Limits — Makes All the Difference

Using an iPad to control a Windows PC isn't quite as seamless as it sounds. Touch input and mouse input are fundamentally different, and without a few adjustments, the experience can feel clunky fast. This guide covers the setup process from scratch, the gestures and settings that actually make it workable, and the honest limitations you'll run into if you push it too far.

Why Do So Many iPad Users Start with Chrome Remote Desktop?

Among all the remote desktop options out there, Chrome Remote Desktop wins on approachability. The reason comes down to its sheer ease of use.

Low Cost, Low Friction

Completely free, with no feature restrictions: Whether for personal or professional use, everything is available at no cost — the biggest advantage by far.
No complex setup required: No VPN configuration, no router port-forwarding, no specialist knowledge needed. If you have a Google account, setup takes a few minutes.
Works across devices: Windows, Mac, and iPadOS all connect seamlessly — no environment restrictions.

For anyone who wants to try remote access on their existing iPad without spending anything or reconfiguring their network, CRD is the right place to start.

How to Make Windows Actually Comfortable on an iPad

An iPad and a Windows PC speak different languages — one is built for touch, the other for a mouse. Bridging that gap takes some deliberate setup.

Switch Between Touch Mode and Trackpad Mode

The iPad app offers two control modes. Not knowing about this is the most common reason people give up early.

Trackpad Mode (recommended): Moving your finger anywhere on screen moves the mouse cursor — similar to using a laptop trackpad. Right-click and drag-and-drop work accurately, making this the right choice for Excel, business software, or anything requiring precise input.
Touch Mode: Tapping the screen directly clicks at that point. This works better for browsing or watching videos — consumption tasks rather than production work.
Tip: Switch between modes instantly from the side-panel menu that appears when you swipe in from the right edge of the screen. Get into the habit of switching based on what you're doing.

Essential Gestures — No Mouse Needed

You can replicate most standard mouse actions with just your fingers:

Right-click: Tap with two fingers simultaneously
Drag and drop: Long-press on a target with one finger, then slide
Scroll: Slide two fingers up or down

Keyboard Input: Getting the Command Key to Behave

If you're using an iPad keyboard like the Magic Keyboard, the key layout takes some getting used to.

Command = Ctrl: The iPad's Command key functions as the Windows Ctrl key in remote sessions. Command + C copies, Command + V pastes — standard shortcuts carry over in that sense.
Japanese input switching: This is where most people hit a wall. The usual shortcuts for toggling between Japanese and English input (nihongo nyūryoku, 日本語入力) — Ctrl + Space or Caps Lock — often don't transmit cleanly to Windows. When this happens, the most reliable workaround is tapping the IME icon in the Windows taskbar directly, or reconfiguring the input method shortcut on the Windows side.

Step-by-Step: Connecting Your iPad to a Windows PC

Step 1 — Configure the Windows PC (Host)

Start on the Windows machine you want to access remotely.

Access the official site in Chrome: Open Chrome and go to remotedesktop.google.com/access
Install the extension: Under "Set up remote access," click the blue download icon and install the Chrome extension.
Enable Remote Access: Click "Turn on" and give your PC a name.
Set your PIN: Create a PIN of at least six digits — you'll need this every time you connect from your iPad. The Windows PC is now ready.

Step 2 — Install the App and Log In on Your iPad

Download the app: Search for "Chrome Remote Desktop" in the App Store and install it.
Log in: Sign in with the same Google account you used on your Windows PC.
Select your PC: Your PC will appear in the device list once it's online.

Step 3 — Connect and Adjust the Display

Enter your PIN: Select your PC from the list and enter the PIN you set. Connection is now established.
Optimise the display: Open the menu (the three-line icon at the bottom right of the screen), go to Settings, and enable "Shrink to fit." This resizes the Windows display to match your iPad's screen, so you're not scrolling around a desktop that doesn't fit.

Four Real Limitations of Chrome Remote Desktop on iPad

CRD is genuinely useful — but if you're trying to use your iPad as a primary work machine through it, these friction points will catch up with you.

1. Aspect Ratio and Display Quality

iPads use a 4:3 aspect ratio; most Windows PCs use 16:9.

Black bars: When displayed on an iPad, large black bars appear at the top and bottom of the screen, reducing your actual working area.
Blurry text: CRD isn't optimised for Retina displays, so fine text — spreadsheet cells, small interface labels — appears soft and blurry. After an hour of this, eye fatigue sets in fast.

2. Japanese Input Switching Is a Persistent Headache

This is the biggest pain point for most users working in Japanese.

Shortcut conflicts: Trying to switch between Japanese and English input on the iPad side doesn't transmit cleanly to Windows, leading to constant input errors and frustrating interruptions.
Typing lag: Depending on network conditions, typed characters can appear a beat behind what you're typing — making longer Japanese text genuinely painful to compose.

3. Mouse and Peripheral Compatibility Has Real Limits

Even with a physical mouse connected to your iPad, the experience doesn't match what you'd get on a PC.

Unnatural scrolling: Scroll wheel behaviour can be jerky or even reversed.
Advanced inputs not supported: Mouse side buttons aren't recognised, and right-clicking requires a long-press or two-finger tap workaround rather than a direct click. The speed and fluidity of a real PC setup simply isn't achievable.

4. No Direct File Transfer

Chrome Remote Desktop is purely a screen control tool — it doesn't support file transfer between your iPad and Windows PC.

No direct sending: Transferring a photo from your iPad to Windows, or saving a Windows document to your iPad, requires routing through cloud storage like Google Drive or iCloud. It works, but it breaks your workflow every time.

When You're Ready for More: DeskIn as a Serious Work Tool

If CRD's limitations are getting in the way of actual productivity, DeskIn was built to solve exactly those problems. Where CRD is designed for "basic screen control," DeskIn is designed for genuine professional use — remote sessions that feel as close to working locally as possible.

4K/60FPS with Full Retina Display Support — No More Blurry Screens

The blurry text and choppy movement that characterise CRD on an iPad? DeskIn eliminates both.

Outstanding display quality: 4K resolution and 60FPS high frame rate support. iPad's Retina display is used to its full potential — the experience feels like running Windows locally.
Automatic aspect ratio optimisation: DeskIn adapts automatically to the iPad's 4:3 ratio, filling the screen properly without black bars.

Keyboard and Mouse That Actually Work Properly

Input performance is where the gap between DeskIn and CRD is most noticeable.

Stress-free Japanese input: Switching between Japanese and English works smoothly. iPad keyboard shortcuts don't conflict with Windows, so you can type in full focus.
Gaming-level peripheral support: Scroll wheel and mouse side buttons fully supported. DeskIn also lets you place custom virtual keyboard layouts — for gaming or work — directly on screen, useful in environments where you don't have a hardware keyboard to hand.

Features Built for Real Work

Standard features not found in CRD, all directly relevant to getting work done:

Direct file transfer: Move files between your iPad and Windows PC without touching cloud storage. Photos, documents, design files — sent directly and immediately.
Multi-monitor support: Use your iPad as an extended display for your Windows PC — effectively a second screen — when working away from your desk.
Independent security: DeskIn uses its own advanced encryption and doesn't rely on a Google account, reducing the single point of failure that CRD carries.

Summary: Choose the Right Tool for the Job

Remote access from iPad to Windows opens up genuine flexibility in how and where you work. But which tool is right for you depends on what you're actually trying to do.

Chrome Remote Desktop works well if you:

Want a completely free solution with no setup complexity
Only need occasional access — checking a file, making a quick change
Don't need precision input or extended work sessions

DeskIn is worth considering if you:

Want your iPad to function as a genuine secondary work machine
Need to do extended work in Excel, document editing, or design tools
Find the display quality, input lag, or Japanese input issues frustrating
Want to transfer files directly between iPad and Windows without cloud workarounds

A Practical Suggestion

Starting with Chrome Remote Desktop is a perfectly reasonable approach — it costs nothing and gets you connected in minutes. But if you keep running into the same friction points — blurry display, awkward Japanese input, no file transfer — that's a clear signal your workflow needs more than CRD can offer.

That's when DeskIn is worth installing. Your iPad becomes a considerably more capable Windows machine than you might have expected.

Recommended Reads:
A Must-Read for Fresh Professionals: How Remote Desktop Can Support Your Fresh Start

How to Use AnyDesk Wake on LAN to Power On Your Remote PC

If you want to remotely power on a sleeping computer, AnyDesk Wake on LAN can be a useful feature. It allows you to wake a device without physically pressing the power button, making remote work and system maintenance much easier.

In this guide, we'll walk through how to configure AnyDesk Wake on LAN step by step, including BIOS settings, operating system configuration, and AnyDesk options. While the process works well when everything is configured correctly, it can also involve several technical steps. That's why we'll also introduce DeskIn, a simpler and more streamlined alternative for remote access and Wake on LAN. Keep reading to learn both approaches.

What Is Wake on LAN and Why Do You Need It?

Wake on LAN is a networking feature that allows a device to be powered on remotely through a special network signal known as a "magic packet." When the sleeping computer's network card receives this packet, it sends a signal to the motherboard to start the system.

The main benefit of Wake on LAN is convenience and energy efficiency. Instead of keeping a computer running all day, you can leave it in sleep or shutdown mode and wake it only when needed. This saves electricity and extends hardware lifespan.

Another advantage is accessibility. Whether you're working from home, performing remote maintenance, or managing servers, Wake on LAN ensures devices remain reachable even when they are powered down. IT teams often rely on this capability to troubleshoot systems or perform updates without being physically present.

How to Set Up AnyDesk Wake on LAN Step by Step

Configuring AnyDesk Wake on LAN involves preparing the hardware, enabling settings in your operating system, and activating the feature in AnyDesk itself. The steps below will guide you through the process.

Step 1. Enable Wake on LAN in BIOS or UEFI

The first requirement is enabling Wake on LAN at the motherboard level.

Restart your computer.
Enter the BIOS or UEFI menu during startup (usually by pressing F2, DEL, or F10).
Open the Power Management section.
Locate a setting such as Wake on LAN, Power on by PCI-E, or similar.
Enable the option.
Save changes and exit the BIOS.

This step ensures the motherboard will allow network signals to power the system on.

Step 2. Configure the Network Adapter in Windows

Next, you need to allow the network card to receive wake signals.

Open Device Manager.
Expand Network Adapters.
Right-click your Ethernet adapter and select Properties.
Go to the Advanced tab and enable Wake on Magic Packet.
Open the Power Management tab.
Check Allow this device to wake the computer.
Also, enable Only allow a magic packet to wake the computer.

For users running AnyDesk Wake on LAN on Windows 11 or older systems, these steps are essentially the same.

Enable Wake on Magic Packet in network adapter setting

Step 3. Disable Fast Startup (Optional but Recommended)

Some Windows systems block network wake signals due to the fast startup feature.

To disable it:

Open Control Panel.
Go to Power Options.
Click Choose what the power buttons do.
Select Change settings that are currently unavailable.
Uncheck Turn on fast startup.

This step often fixes situations where AnyDesk Wake on LAN is not working even though the configuration appears correct.

Step 4. Enable Wake on LAN Inside AnyDesk

Now configure the feature inside the AnyDesk client.

Open AnyDesk on the target computer.
Go to Settings.
Navigate to the Wake-on-LAN option.
Enable Allow Wake-on-LAN.
Ensure another AnyDesk device on the same network remains online.

When you try to connect to the sleeping device, AnyDesk will show a "Power On" option.

AnyDesk Power On button to trigger Wake on LAN

Step 5. Wake the Device Remotely

After completing the setup:

Open AnyDesk on your remote device.
Enter the address of the sleeping computer.
Click Power On.

AnyDesk will locate another active device on the same network and ask it to send the wake packet.

This process is how Wake on LAN AnyDesk functions behind the scenes. If everything is configured correctly, the sleeping machine will start, and AnyDesk will automatically connect.

Troubleshooting Common Wake Issues

Sometimes you may see errors such as AnyDesk Wake on LAN no device found. This usually means there is no active device on the same network to send the magic packet. Another frequent issue is that AnyDesk Wake on LAN not working due to Wi-Fi limitations. Wake signals are most reliable over wired Ethernet connections.

If troubleshooting becomes too time-consuming, many users choose tools designed to simplify remote desktop Wake on LAN workflows.

[Bonus] Why DeskIn Is a Smarter Choice

While AnyDesk provides Wake on LAN functionality, the setup process can be technical. Users often need to adjust BIOS settings, network adapters, and device configurations before the feature works properly.

DeskIn focuses on making remote access simpler and more reliable. First, the setup process is easier. Devices linked to the same DeskIn account can be managed quickly without complex network configuration or troubleshooting steps. Second, DeskIn delivers excellent performance for remote connections. It supports high-resolution sessions, smooth frame rates, and stable connections even when accessing powerful workstations remotely. Third, DeskIn integrates device management, remote access, and connectivity tools into one platform. Instead of relying on multiple Wake on LAN software tools, users can manage everything from a single interface.

For professionals who frequently need remote access, DeskIn provides a faster and more predictable experience.

👀 You may also be interested in

FAQs About AnyDesk Wake on LAN

1. Can AnyDesk do Wake-on-LAN?

Yes. AnyDesk supports Wake on LAN as long as the hardware, operating system, and application settings are configured properly. Another device on the same network must remain active to send the wake signal.

2. How do I enable remote Wake-on-LAN?

You must enable Wake on LAN in three places: the BIOS or UEFI firmware, the operating system's network adapter settings, and the AnyDesk client configuration. Once enabled, you can wake a sleeping device remotely.

3. How does Wake on LAN work?

Wake on LAN works by sending a "magic packet" containing the device's MAC address through the network. The network card receives the packet and signals the motherboard to power the system.

4. Does Wake-on-LAN work if the computer is off?

Yes, but only if the system supports Wake on LAN from the shutdown state and still receives standby power through the network adapter. For smoother remote control workflows, many users adopt tools like DeskIn.

Conclusion

Setting up AnyDesk Wake on LAN allows you to power on a remote computer without physically accessing it. By enabling BIOS settings, configuring the network adapter, and activating the feature inside AnyDesk, you can wake sleeping machines and connect instantly.

However, the setup process can sometimes be complicated, especially when dealing with hardware compatibility or network configuration issues. If you prefer a simpler and more reliable remote access experience, DeskIn provides an excellent alternative.

With streamlined device management, stable remote sessions, and easier setup, DeskIn helps you stay connected to your computers anytime while still benefiting from the power of Wake on LAN.

How to Set Up TeamViewer Wake on LAN (Step-by-Step Complete Guide)

Turning on your computer remotely can save time, energy, and frustration. Many users rely on TeamViewer Wake on LAN to start a sleeping computer without physically pressing the power button. Whether you want to access your office PC from home or wake a server in another room, Wake on LAN makes remote work much easier.

In this guide, we'll walk through how to configure TeamViewer Wake on LAN step by step. We'll also introduce DeskIn, a simpler remote access solution that can make remote wake and control smoother and more reliable. If you've ever struggled with complicated configuration or TeamViewer Wake on LAN not working, keep reading to discover an easier approach.

What Is Wake on LAN and How Does It Work?

Wake on LAN (WoL) is a network technology that allows a computer to power on or wake from sleep when it receives a special network signal called a "magic packet." This packet is sent through the network to the computer's network interface card, which remains partially active even when the system is powered down.

When configured correctly, tools like TeamViewer send that packet from another device on the same network or through the internet. The target computer's motherboard and network adapter detect the signal and trigger the system to start up.

This process is often used for remote work, server management, or accessing a home PC while traveling. Many people combine remote desktop Wake on LAN features with remote control software so they can both power on and operate their computer from anywhere.

How to Set Up TeamViewer Wake on LAN

Setting up TeamViewer Wake on LAN involves configuring your hardware, operating system, and TeamViewer settings. Follow the steps below carefully to ensure everything works properly.

Step 1. Enable Wake on LAN in BIOS or UEFI

First, you need to activate Wake on LAN at the hardware level. Restart your computer and enter the BIOS or UEFI setup menu. This is usually done by pressing keys like F2, F12, Delete, or Esc during startup. Inside the BIOS interface, navigate to the Power Management section.

Look for an option such as Wake on LAN, Power On by PCI-E, or Resume by LAN and enable it. Save the settings and exit the BIOS. Without this configuration, no Wake on LAN software will be able to power on your computer remotely.

Step 2. Configure the Network Adapter

Next, you need to allow your network adapter to receive wake signals. Open Device Manager and locate your network adapter under the Network Adapters category. Right-click the adapter and open its Properties panel.

In the Power Management tab, enable the option allowing the device to wake the computer. In the Advanced settings, ensure Wake on Magic Packet is enabled. These steps are essential for both Wake on LAN Windows 10 and Windows 11 configurations. If your adapter does not support WoL, the feature will not work.

Step 3. Disable Fast Startup in Windows

Windows Fast Startup can sometimes interfere with WoL signals. Open Control Panel, go to Power Options, and locate the settings for what the power button does. From there, disable the fast startup feature and save your changes. This small adjustment often fixes problems when Wake on LAN Windows 11 or older Windows versions fail to respond to wake requests.

If these configuration steps start to feel complex, this is where DeskIn stands out. DeskIn integrates remote wake and remote access into a more streamlined workflow with fewer configuration hurdles.

Step 4. Install TeamViewer and Assign the Device

To use TeamViewer Wake on LAN, your computer must be linked to your TeamViewer account. Install the TeamViewer Host application on the computer you want to wake remotely. After installation, sign in and assign the device to your TeamViewer account. Once the computer appears in your device list, you will be able to configure wake options and manage the device remotely.

Step 5. Configure Wake on LAN in TeamViewer

Now you can configure the WoL settings inside TeamViewer. Open the application settings. Under the Device menu, go to Network, click Wake-on-LAN, click "Other TeamViewer within your local network", enter the TeamViewer ID of the device waking up the remote computer, click "Add...", and confirm by clicking "OK".

Step 6. Wake the Computer Remotely

After configuration, open your TeamViewer device list. Locate the offline computer and select the option to wake it. TeamViewer will send a magic packet through the network and start the remote computer. This method works on different systems, including TeamViewer Wake on LAN Mac, although Mac devices typically only wake from sleep mode rather than from a full shutdown.

If the device does not wake up, the issue may relate to network configuration, router settings, or incorrect BIOS settings. Many users searching for Wake on LAN not working run into these common problems.

[Bonus] Why DeskIn Is a Better Choice

While TeamViewer Wake on LAN works for many users, the setup process can be complicated. BIOS configuration, network adapter settings, and router port forwarding can make the process frustrating.

DeskIn offers a more streamlined approach for Wake on LAN and device management. Instead of juggling multiple configuration layers, DeskIn focuses on simplicity and reliability. Once your devices are connected to the same account, you can quickly access and manage them from anywhere without dealing with complicated networking rules. Another advantage is performance. DeskIn supports high-resolution remote sessions with smooth frame delivery, making it suitable not only for office work but also for creative tasks and high-performance workflows. This means you can wake your device, connect instantly, and continue working without interruptions.

DeskIn also integrates device management and remote control into one unified platform. Instead of using separate tools for wake, connection, and control, everything is handled in one place, which reduces troubleshooting time and improves reliability for daily remote work. If you frequently rely on remote desktop Wake on LAN functionality, DeskIn can provide a smoother and more predictable experience compared to traditional setups.

Want to see a detailed DeskIn walkthrough? Read our complete guide on setting up Wake on LAN.

👀 You may also be interested in:

How to Enable AnyDesk Wake on LAN [Step-by-Step Guide]

FAQs about TeamViewer Wake on LAN

1. How to Wake-on-LAN with TeamViewer?

To use Wake on LAN with TeamViewer, you must enable Wake on LAN in BIOS, configure the network adapter, install TeamViewer Host, and set up the WoL settings in the application.

2. Is TeamViewer Wake on LAN free?

Many users ask if TeamViewer Wake on LAN is free. The feature is available in TeamViewer, but commercial usage may require a paid license depending on how the software is used.

3. How do I enable remote Wake-on-LAN?

To enable remote wake functionality, the target computer must support Wake on LAN, be connected via Ethernet, and have WoL activated in both hardware and operating system settings.

4. What if TeamViewer Wake on LAN is not working?

If TeamViewer Wake on LAN is not working, check BIOS settings, network adapter configuration, router port forwarding, and Windows power settings. If the process becomes too complicated, solutions like DeskIn provide simpler remote access alternatives.

Conclusion

Setting up TeamViewer Wake on LAN allows you to power on your computer remotely and access it whenever needed. By enabling Wake on LAN in BIOS, configuring your network adapter, and linking the device to TeamViewer, you can wake your PC from another device across the network.

However, the configuration process can sometimes be complex, especially when dealing with router settings or troubleshooting wake failures. If you want a more streamlined remote access experience, DeskIn offers a powerful alternative with smoother connectivity and easier device management. With DeskIn, you can spend less time configuring systems and more time getting work done remotely.

Control Windows from Your iPad Using Chrome Remote Desktop: Tips & Limits | DeskIn Japan

Can an iPad Actually Replace a Windows PC?

Why Chrome Remote Desktop Is the First Option Most People Try

But Knowing the Tricks — and the Limits — Makes All the Difference

Why Do So Many iPad Users Start with Chrome Remote Desktop?

Among all the remote desktop options out there, Chrome Remote Desktop wins on approachability. The reason comes down to its sheer ease of use.

Low Cost, Low Friction

Completely free, with no feature restrictions: Whether for personal or professional use, everything is available at no cost — the biggest advantage by far.
No complex setup required: No VPN configuration, no router port-forwarding, no specialist knowledge needed. If you have a Google account, setup takes a few minutes.
Works across devices: Windows, Mac, and iPadOS all connect seamlessly — no environment restrictions.

For anyone who wants to try remote access on their existing iPad without spending anything or reconfiguring their network, CRD is the right place to start.

How to Make Windows Actually Comfortable on an iPad

An iPad and a Windows PC speak different languages — one is built for touch, the other for a mouse. Bridging that gap takes some deliberate setup.

Switch Between Touch Mode and Trackpad Mode

The iPad app offers two control modes. Not knowing about this is the most common reason people give up early.

Trackpad Mode (recommended): Moving your finger anywhere on screen moves the mouse cursor — similar to using a laptop trackpad. Right-click and drag-and-drop work accurately, making this the right choice for Excel, business software, or anything requiring precise input.
Touch Mode: Tapping the screen directly clicks at that point. This works better for browsing or watching videos — consumption tasks rather than production work.
Tip: Switch between modes instantly from the side-panel menu that appears when you swipe in from the right edge of the screen. Get into the habit of switching based on what you're doing.

Essential Gestures — No Mouse Needed

You can replicate most standard mouse actions with just your fingers:

Right-click: Tap with two fingers simultaneously
Drag and drop: Long-press on a target with one finger, then slide
Scroll: Slide two fingers up or down

Keyboard Input: Getting the Command Key to Behave

If you're using an iPad keyboard like the Magic Keyboard, the key layout takes some getting used to.

Command = Ctrl: The iPad's Command key functions as the Windows Ctrl key in remote sessions. Command + C copies, Command + V pastes — standard shortcuts carry over in that sense.
Japanese input switching: This is where most people hit a wall. The usual shortcuts for toggling between Japanese and English input (nihongo nyūryoku, 日本語入力) — Ctrl + Space or Caps Lock — often don't transmit cleanly to Windows. When this happens, the most reliable workaround is tapping the IME icon in the Windows taskbar directly, or reconfiguring the input method shortcut on the Windows side.

Step-by-Step: Connecting Your iPad to a Windows PC

Step 1 — Configure the Windows PC (Host)

Start on the Windows machine you want to access remotely.

Access the official site in Chrome: Open Chrome and go to remotedesktop.google.com/access
Install the extension: Under "Set up remote access," click the blue download icon and install the Chrome extension.
Enable Remote Access: Click "Turn on" and give your PC a name.
Set your PIN: Create a PIN of at least six digits — you'll need this every time you connect from your iPad. The Windows PC is now ready.

Step 2 — Install the App and Log In on Your iPad

Download the app: Search for "Chrome Remote Desktop" in the App Store and install it.
Log in: Sign in with the same Google account you used on your Windows PC.
Select your PC: Your PC will appear in the device list once it's online.

Step 3 — Connect and Adjust the Display

Enter your PIN: Select your PC from the list and enter the PIN you set. Connection is now established.
Optimise the display: Open the menu (the three-line icon at the bottom right of the screen), go to Settings, and enable "Shrink to fit." This resizes the Windows display to match your iPad's screen, so you're not scrolling around a desktop that doesn't fit.

Four Real Limitations of Chrome Remote Desktop on iPad

CRD is genuinely useful — but if you're trying to use your iPad as a primary work machine through it, these friction points will catch up with you.

1. Aspect Ratio and Display Quality

iPads use a 4:3 aspect ratio; most Windows PCs use 16:9.

Black bars: When displayed on an iPad, large black bars appear at the top and bottom of the screen, reducing your actual working area.
Blurry text: CRD isn't optimised for Retina displays, so fine text — spreadsheet cells, small interface labels — appears soft and blurry. After an hour of this, eye fatigue sets in fast.

2. Japanese Input Switching Is a Persistent Headache

This is the biggest pain point for most users working in Japanese.

Shortcut conflicts: Trying to switch between Japanese and English input on the iPad side doesn't transmit cleanly to Windows, leading to constant input errors and frustrating interruptions.
Typing lag: Depending on network conditions, typed characters can appear a beat behind what you're typing — making longer Japanese text genuinely painful to compose.

3. Mouse and Peripheral Compatibility Has Real Limits

Even with a physical mouse connected to your iPad, the experience doesn't match what you'd get on a PC.

Unnatural scrolling: Scroll wheel behaviour can be jerky or even reversed.
Advanced inputs not supported: Mouse side buttons aren't recognised, and right-clicking requires a long-press or two-finger tap workaround rather than a direct click. The speed and fluidity of a real PC setup simply isn't achievable.

4. No Direct File Transfer

Chrome Remote Desktop is purely a screen control tool — it doesn't support file transfer between your iPad and Windows PC.

No direct sending: Transferring a photo from your iPad to Windows, or saving a Windows document to your iPad, requires routing through cloud storage like Google Drive or iCloud. It works, but it breaks your workflow every time.

When You're Ready for More: DeskIn as a Serious Work Tool

4K/60FPS with Full Retina Display Support — No More Blurry Screens

The blurry text and choppy movement that characterise CRD on an iPad? DeskIn eliminates both.

Outstanding display quality: 4K resolution and 60FPS high frame rate support. iPad's Retina display is used to its full potential — the experience feels like running Windows locally.
Automatic aspect ratio optimisation: DeskIn adapts automatically to the iPad's 4:3 ratio, filling the screen properly without black bars.

Keyboard and Mouse That Actually Work Properly

Input performance is where the gap between DeskIn and CRD is most noticeable.

Stress-free Japanese input: Switching between Japanese and English works smoothly. iPad keyboard shortcuts don't conflict with Windows, so you can type in full focus.
Gaming-level peripheral support: Scroll wheel and mouse side buttons fully supported. DeskIn also lets you place custom virtual keyboard layouts — for gaming or work — directly on screen, useful in environments where you don't have a hardware keyboard to hand.

Features Built for Real Work

Standard features not found in CRD, all directly relevant to getting work done:

Direct file transfer: Move files between your iPad and Windows PC without touching cloud storage. Photos, documents, design files — sent directly and immediately.
Multi-monitor support: Use your iPad as an extended display for your Windows PC — effectively a second screen — when working away from your desk.
Independent security: DeskIn uses its own advanced encryption and doesn't rely on a Google account, reducing the single point of failure that CRD carries.

Summary: Choose the Right Tool for the Job

Remote access from iPad to Windows opens up genuine flexibility in how and where you work. But which tool is right for you depends on what you're actually trying to do.

Chrome Remote Desktop works well if you:

Want a completely free solution with no setup complexity
Only need occasional access — checking a file, making a quick change
Don't need precision input or extended work sessions

DeskIn is worth considering if you:

Want your iPad to function as a genuine secondary work machine
Need to do extended work in Excel, document editing, or design tools
Find the display quality, input lag, or Japanese input issues frustrating
Want to transfer files directly between iPad and Windows without cloud workarounds

A Practical Suggestion

That's when DeskIn is worth installing. Your iPad becomes a considerably more capable Windows machine than you might have expected.

Recommended Reads:
A Must-Read for Fresh Professionals: How Remote Desktop Can Support Your Fresh Start

How to Use AnyDesk Wake on LAN to Power On Your Remote PC

What Is Wake on LAN and Why Do You Need It?

How to Set Up AnyDesk Wake on LAN Step by Step

Step 1. Enable Wake on LAN in BIOS or UEFI

The first requirement is enabling Wake on LAN at the motherboard level.

Restart your computer.
Enter the BIOS or UEFI menu during startup (usually by pressing F2, DEL, or F10).
Open the Power Management section.
Locate a setting such as Wake on LAN, Power on by PCI-E, or similar.
Enable the option.
Save changes and exit the BIOS.

This step ensures the motherboard will allow network signals to power the system on.

Step 2. Configure the Network Adapter in Windows

Next, you need to allow the network card to receive wake signals.

Open Device Manager.
Expand Network Adapters.
Right-click your Ethernet adapter and select Properties.
Go to the Advanced tab and enable Wake on Magic Packet.
Open the Power Management tab.
Check Allow this device to wake the computer.
Also, enable Only allow a magic packet to wake the computer.

For users running AnyDesk Wake on LAN on Windows 11 or older systems, these steps are essentially the same.

Step 3. Disable Fast Startup (Optional but Recommended)

Some Windows systems block network wake signals due to the fast startup feature.

To disable it:

Open Control Panel.
Go to Power Options.
Click Choose what the power buttons do.
Select Change settings that are currently unavailable.
Uncheck Turn on fast startup.

This step often fixes situations where AnyDesk Wake on LAN is not working even though the configuration appears correct.

Step 4. Enable Wake on LAN Inside AnyDesk

Now configure the feature inside the AnyDesk client.

Open AnyDesk on the target computer.
Go to Settings.
Navigate to the Wake-on-LAN option.
Enable Allow Wake-on-LAN.
Ensure another AnyDesk device on the same network remains online.

When you try to connect to the sleeping device, AnyDesk will show a "Power On" option.

Step 5. Wake the Device Remotely

After completing the setup:

Open AnyDesk on your remote device.
Enter the address of the sleeping computer.
Click Power On.

AnyDesk will locate another active device on the same network and ask it to send the wake packet.

This process is how Wake on LAN AnyDesk functions behind the scenes. If everything is configured correctly, the sleeping machine will start, and AnyDesk will automatically connect.

Troubleshooting Common Wake Issues

If troubleshooting becomes too time-consuming, many users choose tools designed to simplify remote desktop Wake on LAN workflows.

[Bonus] Why DeskIn Is a Smarter Choice

For professionals who frequently need remote access, DeskIn provides a faster and more predictable experience.

👀 You may also be interested in

FAQs About AnyDesk Wake on LAN

1. Can AnyDesk do Wake-on-LAN?

2. How do I enable remote Wake-on-LAN?

3. How does Wake on LAN work?

Wake on LAN works by sending a "magic packet" containing the device's MAC address through the network. The network card receives the packet and signals the motherboard to power the system.

4. Does Wake-on-LAN work if the computer is off?

Conclusion

With streamlined device management, stable remote sessions, and easier setup, DeskIn helps you stay connected to your computers anytime while still benefiting from the power of Wake on LAN.

Tải xuống