搜尋...

小編在Mobile01上看到一個帖子大家討論長輩不會用3C要一直問問題該怎麽辦。這種狀況相信大家都有遇到過,特別是出門不在家時候,電話解説到崩潰他們還是不會操作!有網友說可以用視訊功能,也有給長輩製作SOP的,有的只能無奈假裝不懂。其實相信大家都是想幫長輩解決問題的,今天小編就來介紹一個軟體,分分鐘就能解決長輩手機使用問題。


最常需要協助長輩解決的手機問題

  1. 調整手機設定

智慧手機的使用對長輩來説可能比較複雜,長輩可能常會遇到手機聲音太小什麽沒聲音、字體太小看不清、找不到語音輸入等問題,或是不小心按到什麽設定調不回來,這時候就要我們協助了。

  1. 清理手機緩存

長輩們常喜歡拍很多相片和影片分享在群組,又不懂得清理手機緩存,導致手機越用越慢,也需要我們幫忙解決。

  1. 安裝或卸載軟體

再來就是安裝和卸載軟體了,剛買的新手機需要我們幫他們載好line、地圖等等各種程式,有時安裝了莫名的軟體不會刪除當然也需要我們幫忙了。

  1. 連Wifi網路

這個不用多説,相信大家都有遇到過,每次到酒店長輩都會吧手機遞給我們讓我們幫忙連Wifi網路!

  1. 檢查是否有詐騙訊息或群組

除了以上的幾個,我們日常也要長留意看看長輩的手機有沒有進入了一些詐騙群組或是FB小組,或是收到帶連結的短信。長輩們可能警覺性比較低,我們要幫助他們清理這些資訊或退出相關的群組。

遠距幫長輩操作手機神器:DeskIn遠端軟體

如果我們就在長輩身邊,以上這些問題可能就是一兩分中就能解決的事情,但如果我們不在家,要透過電話跟長輩解釋怎麽操作,那真的是太難了!可能重複講了半個小時,問題還是沒有辦法解決。雖然目前iOS 18的Facetime已經支援直接操控長輩手機,但是很多長輩其實都是用的安卓,又或是你自己不是用的iphone,這時候你就可以使用DeskIn遠端軟體,直接連缐長輩的手機幫忙操作。

爲什麽選擇DeskIn遠端軟體:

  • 安全:

這是最重要的,DeskIn的手機操控功能只能在同帳號下才能進行,可以很好地避免長輩不小心泄露連缐密碼,被其他人連缐手機。

  • 語音通話和標注:

DeskIn内建語音通話功能,連缐時可以一邊了解長輩的問題一邊幫他操作,使用標註功能,還可以邊操作邊作標記,方便長輩看到應該點擊的位置加强印象。

  • 跨系統操作:

DeskIn支援在ios、安卓、mac和Windows上跨平臺使用,用iphone、電腦、安卓手機甚至平板都可以遠端長輩安卓手機,更加方便。

  • 連缐超流暢:

DeskIn的連缐非常穩定,而且無時長限制,免費版就支援1080p顯示,遠端操作也像本地操作一樣流暢。

  • 界面直覺易用:

DeskIn的界面非常簡單,不需要頻繁切換界面,長輩可以輕鬆上手。

如何使用DeskIn?

  • 第一步:在你的裝置以及長輩手機上安裝DeskIn,並登入同一個帳號。

  • 第二步:需要連缐時,長輩打開DeskIn,點擊允許連缐設備即可。

  • 第三步:這時,你就可以在設備列表找到長輩手機並連缐長輩手機了。

可以選擇讓長輩手動驗證連缐申請,也可以提前設定好密碼,直接使用密碼連缐。

結論

本文給大家介紹了一款安全、易用的遠端軟體DeskIn,可以讓我們遠程指導或是直接幫長輩操作手機。省去了大量教學時間,更快速的幫長輩解決3C問題。就算距離很遠,也能讓長輩感受到我們的關懷和用心,讓他們更好地感受現代科技的便利!

What’s next?
How to Enable Remote Desktop on Windows 10 [Best Guide]

How to Enable Remote Desktop on Windows 10 [Best Guide]

How to Enable Remote Desktop Windows 10: Easy Guide & Error Fixes

Want to enable Remote Desktop on Windows 10 but can't find the option or encounter connection issues? You're not alone. Many users run into confusion because Remote Desktop isn't available on all Windows 10 editions, or they miss a few critical setup steps.

In this guide, we'll walk you through how to quickly enable Remote Desktop on Windows 10, explain the system requirements you need to meet, and help you troubleshoot common problems. Read on to turn on Remote Desktop smoothly and start controlling your PC remotely!

System Requirements to Allow Remote Desktop on Windows 10

Before enabling Remote Desktop on your Windows 10 PC, it's essential to ensure that your system meets the requirements. These requirements ensure that Remote Desktop can function properly and allow for a smooth remote connection. Below are the key factors you need to consider.

  • Windows 10 Pro, Enterprise, or Education Edition: Remote Desktop is not supported on Windows 10 Home. If you're using the Home edition, you will need to upgrade to Windows 10 Pro, Enterprise, or Education to enable the feature.

  • Stable Network Connection: For Remote Desktop to function properly, both the local and remote PCs must be connected to a stable and reliable network. A poor or intermittent internet connection could result in dropped sessions or poor performance.

  • Administrator Account Permissions: To enable Remote Desktop on Windows 10, you need to have administrative privileges on the PC. The account you're using must have permission to make system changes, including enabling Remote Desktop.

  • PC Must Be Powered On and Connected to the Internet During Remote Sessions: For remote access to work, the target PC must be powered on and connected to the internet. If the PC is asleep or turned off, the remote connection will fail.

By ensuring your system meets these requirements, you can avoid potential issues when setting up Remote Desktop. In the next section, we'll guide you through the steps to enable Remote Desktop on Windows 10.

Detailed Steps to Turn on Remote Desktop on Windows 10 PC

Enabling Remote Desktop on Windows 10 allows you to remotely access your PC from another device, making it easier to work or troubleshoot from a distance. Follow the steps below to set up Remote Desktop on your Windows 10 device.

Step 1. Open Settings (Win + I > System)

  • Press the "Windows key + I" to open the Settings app.

  • In the Settings window, click on the "System" option to proceed.

Step 2. Find and Turn On Remote Desktop

  • Scroll down within the "System" section until you find Remote Desktop.

  • Toggle the switch to "On" to enable the feature.

  • You will see a confirmation prompt; click "Confirm" to activate Remote Desktop.

Set Up Remote Desktop Feature on Windows

Step 3. Confirm and Allow Access

  • Once Remote Desktop is turned on, you will need to confirm that your PC is accessible remotely.

  • Windows will show the PC name, which you'll need to connect from another device.

  • Make sure the Remote Desktop feature is enabled for remote access.

Step 4. Adjust Firewall Settings

To ensure your PC can accept remote connections, you need to allow Remote Desktop traffic through the firewall. Follow these steps:

  • Open the "Control Panel" by pressing "Win + R", typing "control", and pressing "Enter".

  • Go to "System and Security", and then select "Windows Defender Firewall".

  • In the left-hand menu, click "Allow an app or feature through Windows Defender Firewall".

  • Ensure that Remote Desktop is checked for both "Private" and "Public" network profiles.

Enable Remote Desktop on Windows Firewall Settings

Step 5. Add Additional Users if Needed

By default, only users with administrator privileges can remotely access the PC. If you want to grant access to other users, follow these steps:

  • In the Remote Desktop settings, click on "Select users that can remotely access this PC".

  • You will be prompted to add the usernames of users you wish to grant access to. Enter the name of the user, and click "Add".

  • These users will now be able to connect remotely to your PC, provided they have the correct login credentials.

How to Find Your Windows 10 Computer Name or IP Address

After enabling Remote Desktop, you'll need your computer's name or IP address to establish a successful connection from another device. Here's how to quickly find this information on Windows 10.

Find Your Computer Name

  1. Press "Win + I" to open the Settings app.

  2. Navigate to "System > About".

  3. Under the "Device specifications" section, look for Device name — this is your computer's name, which you'll use for Remote Desktop connections.

Find Your Computer Name on Windows PC

Find Your IP Address

  1. Press "Win + R", type "cmd", and press "Enter" to open the Command Prompt.

  2. In the Command Prompt window, type "ipconfig" and press "Enter".

  3. Look for the IPv4 Address under your active network connection. This is your PC's IP address.

Find Your IP Address on Windows PC

After you've got all the information you need, you can start to connect with the Remote Desktop Connection to easily remote access another Windows computer!

👀 Tips:

  • If you are connecting within the same local network (LAN), using the Device name is usually enough.

  • For connections over the internet, you might need the public IP address and configure router settings like port forwarding.

Common Fixes About Remote Desktop Windows 10 Activation

Even after following the setup steps, you might encounter issues when trying to activate or use Remote Desktop on Windows 10. Below are answers and solutions to some of the most common problems.

Can't Find Remote Desktop Connection Windows 10?

If you can't locate the Remote Desktop settings or app on your Windows 10 device, it could be due to one of the following reasons:

  • Windows 10 Home Edition: Remote Desktop is not available on Windows 10 Home. You will need to upgrade to Windows 10 Pro, Enterprise, or Education to access this feature.

  • Feature Not Enabled: Even on supported editions, Remote Desktop may not be turned on by default. Follow the steps outlined earlier to enable it manually.

  • Hidden Settings: Sometimes, system updates or IT policies may hide Remote Desktop settings. Ensure your Windows 10 installation is up-to-date and check with your system administrator if needed.

Cannot Use Remote Desktop Connection on Windows 10?

If you have enabled Remote Desktop but still cannot connect, check the following:

  • Firewall Settings: Ensure that Remote Desktop is allowed through Windows Defender Firewall. Go to "Control Panel > Windows Defender Firewall > Allow an app or feature through Windows Defender Firewall", and make sure Remote Desktop is enabled for both private and public networks.

  • Network Configuration: Remote Desktop requires a stable network connection. If you're connecting over the internet, you may need to configure port forwarding (TCP 3389) on your router.

  • User Permissions: By default, only administrator accounts are allowed to connect remotely. Make sure the user account you are trying to use has remote access permission. You can add users in "Settings > System > Remote Desktop > Select users that can remotely access this PC".

Does Remote Desktop Connection Come with Windows 10?

Remote Desktop Connection is included in certain editions of Windows 10, but not all:

  • Included: Windows 10 Pro, Enterprise, and Education editions come with built-in Remote Desktop functionality.

  • Not Included: Windows 10 Home edition does not support Remote Desktop hosting (only connecting to other PCs is possible).

    • If you're using Windows 10 Home and want to enable Remote Desktop hosting, you will need to upgrade to a Pro version or explore third-party remote desktop software alternatives.

Bonus: An Easier Alternative to Remote Desktop - DeskIn App

While Windows 10's built-in Remote Desktop is powerful, it can sometimes be complicated to set up, especially if you're using the Home edition, dealing with network configurations, or facing firewall restrictions. If you're looking for a faster, easier, and more flexible way to access your PC remotely, DeskIn is a highly recommended alternative.

Click here to download DeskIn

👀 DeskIn offers:

  • No version limitations: Works across Windows 10 Home, Pro, and other editions.

  • Simple setup: No need to configure firewalls or ports.

  • Cross-platform access: Connect from Windows, macOS, Android, iOS, and even Web browsers.

  • High-speed performance: Optimized for smooth remote sessions, even on lower bandwidths.

With DeskIn, you can start remote control in just a few clicks, no complicated system settings required. Here are the brief steps for you to use it.

  1. Download and install DeskIn on both your local and remote devices.

  2. Sign up and log in with the same DeskIn account on both sides.

  3. Get the DeskIn ID of the remote device you want to control.

  4. Enter the ID and connect, then enjoy a smooth and secure remote session instantly.

Remote Access Windows via DeskIn

Final Words

Enabling Remote Desktop on Windows 10 can greatly enhance your productivity, whether you're accessing work files from home or providing support to another PC. By following the correct setup steps and addressing common issues, you can ensure a smooth and secure remote connection.

If you find Remote Desktop too complicated or limited by system requirements, tools like DeskIn offer a simpler and more flexible alternative. Choose the method that best fits your needs, and enjoy seamless remote access on Windows 10!

Click here to download DeskIn

How to Enable Remote Desktop on Windows 10 [Best Guide]

How to Enable Remote Desktop on Windows 10 [Best Guide]

How to Enable Remote Desktop Windows 10: Easy Guide & Error Fixes

Want to enable Remote Desktop on Windows 10 but can't find the option or encounter connection issues? You're not alone. Many users run into confusion because Remote Desktop isn't available on all Windows 10 editions, or they miss a few critical setup steps.

In this guide, we'll walk you through how to quickly enable Remote Desktop on Windows 10, explain the system requirements you need to meet, and help you troubleshoot common problems. Read on to turn on Remote Desktop smoothly and start controlling your PC remotely!

System Requirements to Allow Remote Desktop on Windows 10

Before enabling Remote Desktop on your Windows 10 PC, it's essential to ensure that your system meets the requirements. These requirements ensure that Remote Desktop can function properly and allow for a smooth remote connection. Below are the key factors you need to consider.

  • Windows 10 Pro, Enterprise, or Education Edition: Remote Desktop is not supported on Windows 10 Home. If you're using the Home edition, you will need to upgrade to Windows 10 Pro, Enterprise, or Education to enable the feature.

  • Stable Network Connection: For Remote Desktop to function properly, both the local and remote PCs must be connected to a stable and reliable network. A poor or intermittent internet connection could result in dropped sessions or poor performance.

  • Administrator Account Permissions: To enable Remote Desktop on Windows 10, you need to have administrative privileges on the PC. The account you're using must have permission to make system changes, including enabling Remote Desktop.

  • PC Must Be Powered On and Connected to the Internet During Remote Sessions: For remote access to work, the target PC must be powered on and connected to the internet. If the PC is asleep or turned off, the remote connection will fail.

By ensuring your system meets these requirements, you can avoid potential issues when setting up Remote Desktop. In the next section, we'll guide you through the steps to enable Remote Desktop on Windows 10.

Detailed Steps to Turn on Remote Desktop on Windows 10 PC

Enabling Remote Desktop on Windows 10 allows you to remotely access your PC from another device, making it easier to work or troubleshoot from a distance. Follow the steps below to set up Remote Desktop on your Windows 10 device.

Step 1. Open Settings (Win + I > System)

  • Press the "Windows key + I" to open the Settings app.

  • In the Settings window, click on the "System" option to proceed.

Step 2. Find and Turn On Remote Desktop

  • Scroll down within the "System" section until you find Remote Desktop.

  • Toggle the switch to "On" to enable the feature.

  • You will see a confirmation prompt; click "Confirm" to activate Remote Desktop.

Set Up Remote Desktop Feature on Windows

Step 3. Confirm and Allow Access

  • Once Remote Desktop is turned on, you will need to confirm that your PC is accessible remotely.

  • Windows will show the PC name, which you'll need to connect from another device.

  • Make sure the Remote Desktop feature is enabled for remote access.

Step 4. Adjust Firewall Settings

To ensure your PC can accept remote connections, you need to allow Remote Desktop traffic through the firewall. Follow these steps:

  • Open the "Control Panel" by pressing "Win + R", typing "control", and pressing "Enter".

  • Go to "System and Security", and then select "Windows Defender Firewall".

  • In the left-hand menu, click "Allow an app or feature through Windows Defender Firewall".

  • Ensure that Remote Desktop is checked for both "Private" and "Public" network profiles.

Enable Remote Desktop on Windows Firewall Settings

Step 5. Add Additional Users if Needed

By default, only users with administrator privileges can remotely access the PC. If you want to grant access to other users, follow these steps:

  • In the Remote Desktop settings, click on "Select users that can remotely access this PC".

  • You will be prompted to add the usernames of users you wish to grant access to. Enter the name of the user, and click "Add".

  • These users will now be able to connect remotely to your PC, provided they have the correct login credentials.

How to Find Your Windows 10 Computer Name or IP Address

After enabling Remote Desktop, you'll need your computer's name or IP address to establish a successful connection from another device. Here's how to quickly find this information on Windows 10.

Find Your Computer Name

  1. Press "Win + I" to open the Settings app.

  2. Navigate to "System > About".

  3. Under the "Device specifications" section, look for Device name — this is your computer's name, which you'll use for Remote Desktop connections.

Find Your Computer Name on Windows PC

Find Your IP Address

  1. Press "Win + R", type "cmd", and press "Enter" to open the Command Prompt.

  2. In the Command Prompt window, type "ipconfig" and press "Enter".

  3. Look for the IPv4 Address under your active network connection. This is your PC's IP address.

Find Your IP Address on Windows PC

After you've got all the information you need, you can start to connect with the Remote Desktop Connection to easily remote access another Windows computer!

👀 Tips:

  • If you are connecting within the same local network (LAN), using the Device name is usually enough.

  • For connections over the internet, you might need the public IP address and configure router settings like port forwarding.

Common Fixes About Remote Desktop Windows 10 Activation

Even after following the setup steps, you might encounter issues when trying to activate or use Remote Desktop on Windows 10. Below are answers and solutions to some of the most common problems.

Can't Find Remote Desktop Connection Windows 10?

If you can't locate the Remote Desktop settings or app on your Windows 10 device, it could be due to one of the following reasons:

  • Windows 10 Home Edition: Remote Desktop is not available on Windows 10 Home. You will need to upgrade to Windows 10 Pro, Enterprise, or Education to access this feature.

  • Feature Not Enabled: Even on supported editions, Remote Desktop may not be turned on by default. Follow the steps outlined earlier to enable it manually.

  • Hidden Settings: Sometimes, system updates or IT policies may hide Remote Desktop settings. Ensure your Windows 10 installation is up-to-date and check with your system administrator if needed.

Cannot Use Remote Desktop Connection on Windows 10?

If you have enabled Remote Desktop but still cannot connect, check the following:

  • Firewall Settings: Ensure that Remote Desktop is allowed through Windows Defender Firewall. Go to "Control Panel > Windows Defender Firewall > Allow an app or feature through Windows Defender Firewall", and make sure Remote Desktop is enabled for both private and public networks.

  • Network Configuration: Remote Desktop requires a stable network connection. If you're connecting over the internet, you may need to configure port forwarding (TCP 3389) on your router.

  • User Permissions: By default, only administrator accounts are allowed to connect remotely. Make sure the user account you are trying to use has remote access permission. You can add users in "Settings > System > Remote Desktop > Select users that can remotely access this PC".

Does Remote Desktop Connection Come with Windows 10?

Remote Desktop Connection is included in certain editions of Windows 10, but not all:

  • Included: Windows 10 Pro, Enterprise, and Education editions come with built-in Remote Desktop functionality.

  • Not Included: Windows 10 Home edition does not support Remote Desktop hosting (only connecting to other PCs is possible).

    • If you're using Windows 10 Home and want to enable Remote Desktop hosting, you will need to upgrade to a Pro version or explore third-party remote desktop software alternatives.

Bonus: An Easier Alternative to Remote Desktop - DeskIn App

While Windows 10's built-in Remote Desktop is powerful, it can sometimes be complicated to set up, especially if you're using the Home edition, dealing with network configurations, or facing firewall restrictions. If you're looking for a faster, easier, and more flexible way to access your PC remotely, DeskIn is a highly recommended alternative.

Click here to download DeskIn

👀 DeskIn offers:

  • No version limitations: Works across Windows 10 Home, Pro, and other editions.

  • Simple setup: No need to configure firewalls or ports.

  • Cross-platform access: Connect from Windows, macOS, Android, iOS, and even Web browsers.

  • High-speed performance: Optimized for smooth remote sessions, even on lower bandwidths.

With DeskIn, you can start remote control in just a few clicks, no complicated system settings required. Here are the brief steps for you to use it.

  1. Download and install DeskIn on both your local and remote devices.

  2. Sign up and log in with the same DeskIn account on both sides.

  3. Get the DeskIn ID of the remote device you want to control.

  4. Enter the ID and connect, then enjoy a smooth and secure remote session instantly.

Remote Access Windows via DeskIn

Final Words

Enabling Remote Desktop on Windows 10 can greatly enhance your productivity, whether you're accessing work files from home or providing support to another PC. By following the correct setup steps and addressing common issues, you can ensure a smooth and secure remote connection.

If you find Remote Desktop too complicated or limited by system requirements, tools like DeskIn offer a simpler and more flexible alternative. Choose the method that best fits your needs, and enjoy seamless remote access on Windows 10!

Click here to download DeskIn

How to Enable Remote Desktop on Windows 10 [Best Guide]

How to Enable Remote Desktop on Windows 10 [Best Guide]

How to Enable Remote Desktop Windows 10: Easy Guide & Error Fixes

Want to enable Remote Desktop on Windows 10 but can't find the option or encounter connection issues? You're not alone. Many users run into confusion because Remote Desktop isn't available on all Windows 10 editions, or they miss a few critical setup steps.

In this guide, we'll walk you through how to quickly enable Remote Desktop on Windows 10, explain the system requirements you need to meet, and help you troubleshoot common problems. Read on to turn on Remote Desktop smoothly and start controlling your PC remotely!

System Requirements to Allow Remote Desktop on Windows 10

Before enabling Remote Desktop on your Windows 10 PC, it's essential to ensure that your system meets the requirements. These requirements ensure that Remote Desktop can function properly and allow for a smooth remote connection. Below are the key factors you need to consider.

  • Windows 10 Pro, Enterprise, or Education Edition: Remote Desktop is not supported on Windows 10 Home. If you're using the Home edition, you will need to upgrade to Windows 10 Pro, Enterprise, or Education to enable the feature.

  • Stable Network Connection: For Remote Desktop to function properly, both the local and remote PCs must be connected to a stable and reliable network. A poor or intermittent internet connection could result in dropped sessions or poor performance.

  • Administrator Account Permissions: To enable Remote Desktop on Windows 10, you need to have administrative privileges on the PC. The account you're using must have permission to make system changes, including enabling Remote Desktop.

  • PC Must Be Powered On and Connected to the Internet During Remote Sessions: For remote access to work, the target PC must be powered on and connected to the internet. If the PC is asleep or turned off, the remote connection will fail.

By ensuring your system meets these requirements, you can avoid potential issues when setting up Remote Desktop. In the next section, we'll guide you through the steps to enable Remote Desktop on Windows 10.

Detailed Steps to Turn on Remote Desktop on Windows 10 PC

Enabling Remote Desktop on Windows 10 allows you to remotely access your PC from another device, making it easier to work or troubleshoot from a distance. Follow the steps below to set up Remote Desktop on your Windows 10 device.

Step 1. Open Settings (Win + I > System)

  • Press the "Windows key + I" to open the Settings app.

  • In the Settings window, click on the "System" option to proceed.

Step 2. Find and Turn On Remote Desktop

  • Scroll down within the "System" section until you find Remote Desktop.

  • Toggle the switch to "On" to enable the feature.

  • You will see a confirmation prompt; click "Confirm" to activate Remote Desktop.

Set Up Remote Desktop Feature on Windows

Step 3. Confirm and Allow Access

  • Once Remote Desktop is turned on, you will need to confirm that your PC is accessible remotely.

  • Windows will show the PC name, which you'll need to connect from another device.

  • Make sure the Remote Desktop feature is enabled for remote access.

Step 4. Adjust Firewall Settings

To ensure your PC can accept remote connections, you need to allow Remote Desktop traffic through the firewall. Follow these steps:

  • Open the "Control Panel" by pressing "Win + R", typing "control", and pressing "Enter".

  • Go to "System and Security", and then select "Windows Defender Firewall".

  • In the left-hand menu, click "Allow an app or feature through Windows Defender Firewall".

  • Ensure that Remote Desktop is checked for both "Private" and "Public" network profiles.

Enable Remote Desktop on Windows Firewall Settings

Step 5. Add Additional Users if Needed

By default, only users with administrator privileges can remotely access the PC. If you want to grant access to other users, follow these steps:

  • In the Remote Desktop settings, click on "Select users that can remotely access this PC".

  • You will be prompted to add the usernames of users you wish to grant access to. Enter the name of the user, and click "Add".

  • These users will now be able to connect remotely to your PC, provided they have the correct login credentials.

How to Find Your Windows 10 Computer Name or IP Address

After enabling Remote Desktop, you'll need your computer's name or IP address to establish a successful connection from another device. Here's how to quickly find this information on Windows 10.

Find Your Computer Name

  1. Press "Win + I" to open the Settings app.

  2. Navigate to "System > About".

  3. Under the "Device specifications" section, look for Device name — this is your computer's name, which you'll use for Remote Desktop connections.

Find Your Computer Name on Windows PC

Find Your IP Address

  1. Press "Win + R", type "cmd", and press "Enter" to open the Command Prompt.

  2. In the Command Prompt window, type "ipconfig" and press "Enter".

  3. Look for the IPv4 Address under your active network connection. This is your PC's IP address.

Find Your IP Address on Windows PC

After you've got all the information you need, you can start to connect with the Remote Desktop Connection to easily remote access another Windows computer!

👀 Tips:

  • If you are connecting within the same local network (LAN), using the Device name is usually enough.

  • For connections over the internet, you might need the public IP address and configure router settings like port forwarding.

Common Fixes About Remote Desktop Windows 10 Activation

Even after following the setup steps, you might encounter issues when trying to activate or use Remote Desktop on Windows 10. Below are answers and solutions to some of the most common problems.

Can't Find Remote Desktop Connection Windows 10?

If you can't locate the Remote Desktop settings or app on your Windows 10 device, it could be due to one of the following reasons:

  • Windows 10 Home Edition: Remote Desktop is not available on Windows 10 Home. You will need to upgrade to Windows 10 Pro, Enterprise, or Education to access this feature.

  • Feature Not Enabled: Even on supported editions, Remote Desktop may not be turned on by default. Follow the steps outlined earlier to enable it manually.

  • Hidden Settings: Sometimes, system updates or IT policies may hide Remote Desktop settings. Ensure your Windows 10 installation is up-to-date and check with your system administrator if needed.

Cannot Use Remote Desktop Connection on Windows 10?

If you have enabled Remote Desktop but still cannot connect, check the following:

  • Firewall Settings: Ensure that Remote Desktop is allowed through Windows Defender Firewall. Go to "Control Panel > Windows Defender Firewall > Allow an app or feature through Windows Defender Firewall", and make sure Remote Desktop is enabled for both private and public networks.

  • Network Configuration: Remote Desktop requires a stable network connection. If you're connecting over the internet, you may need to configure port forwarding (TCP 3389) on your router.

  • User Permissions: By default, only administrator accounts are allowed to connect remotely. Make sure the user account you are trying to use has remote access permission. You can add users in "Settings > System > Remote Desktop > Select users that can remotely access this PC".

Does Remote Desktop Connection Come with Windows 10?

Remote Desktop Connection is included in certain editions of Windows 10, but not all:

  • Included: Windows 10 Pro, Enterprise, and Education editions come with built-in Remote Desktop functionality.

  • Not Included: Windows 10 Home edition does not support Remote Desktop hosting (only connecting to other PCs is possible).

    • If you're using Windows 10 Home and want to enable Remote Desktop hosting, you will need to upgrade to a Pro version or explore third-party remote desktop software alternatives.

Bonus: An Easier Alternative to Remote Desktop - DeskIn App

While Windows 10's built-in Remote Desktop is powerful, it can sometimes be complicated to set up, especially if you're using the Home edition, dealing with network configurations, or facing firewall restrictions. If you're looking for a faster, easier, and more flexible way to access your PC remotely, DeskIn is a highly recommended alternative.

Click here to download DeskIn

👀 DeskIn offers:

  • No version limitations: Works across Windows 10 Home, Pro, and other editions.

  • Simple setup: No need to configure firewalls or ports.

  • Cross-platform access: Connect from Windows, macOS, Android, iOS, and even Web browsers.

  • High-speed performance: Optimized for smooth remote sessions, even on lower bandwidths.

With DeskIn, you can start remote control in just a few clicks, no complicated system settings required. Here are the brief steps for you to use it.

  1. Download and install DeskIn on both your local and remote devices.

  2. Sign up and log in with the same DeskIn account on both sides.

  3. Get the DeskIn ID of the remote device you want to control.

  4. Enter the ID and connect, then enjoy a smooth and secure remote session instantly.

Remote Access Windows via DeskIn

Final Words

Enabling Remote Desktop on Windows 10 can greatly enhance your productivity, whether you're accessing work files from home or providing support to another PC. By following the correct setup steps and addressing common issues, you can ensure a smooth and secure remote connection.

If you find Remote Desktop too complicated or limited by system requirements, tools like DeskIn offer a simpler and more flexible alternative. Choose the method that best fits your needs, and enjoy seamless remote access on Windows 10!

Click here to download DeskIn

Remote Desktop Connection Windows: How to Set Up & Use It?

Remote Desktop Connection Windows: How to Set Up & Use It?

Remote Desktop Connection Windows: How to Set Up & Use It?

With Microsoft officially discontinuing the UWP version of Remote Desktop, many users are now seeking reliable ways to connect remotely to their Windows devices. Fortunately, Windows still offers a built-in solution, Remote Desktop Connection, which allows users to access and control their PCs from virtually anywhere. Whether you're using Windows 10 or Windows 11, setting up a remote desktop connection on Windows remains a straightforward and effective way to stay productive across multiple devices.

In this article, we'll walk you through everything you need to know about enabling and using Remote Desktop Connection on Windows, address common issues you might encounter, and introduce a powerful alternative for those looking for even more flexibility and performance.

👀 Related Info:

Microsoft Remote Desktop Shutting Down: All You Need to Know

What Is Remote Desktop Connection?

Remote Desktop Connection is a built-in feature in Windows that allows users to connect to and operate a Windows PC from another device, regardless of location. Though Microsoft has released the Windows app as an updated solution, this tool is still useful if you want to access your work computers while traveling, provide remote support, or even collaborate with team members across different locations.

Remote Desktop Connection uses the Remote Desktop Protocol (RDP) to establish a secure connection between devices. Whether you're using Windows 10 or Windows 11, setting up remote desktop connection on Windows can significantly enhance your workflow, offering flexibility and convenience for a wide range of scenarios.

Common Use Cases for Remote Desktop Connection

  • Remote Work and Team Collaboration: With more businesses shifting to remote or hybrid work models, Remote Desktop Connection enables employees to access their office PCs from home or while traveling, ensuring they can continue working seamlessly on critical files and applications.

  • Remote Support and Troubleshooting: IT professionals and technical support teams frequently use Remote Desktop Connection to assist users with troubleshooting or to remotely configure settings on a device. This eliminates the need for in-person visits, saving time and resources.

  • Accessing Personal Files and Applications: Users can also utilize Remote Desktop Connection to access personal computers from their laptops or mobile devices, making it easy to retrieve files or run applications as if they were sitting right in front of their desktop.

  • Remote Gaming and Entertainment: Gamers can take advantage of Remote Desktop Connection to stream games from their gaming PC to another device, such as a laptop or tablet, for a seamless gaming experience, even while away from home.

In short, Remote Desktop Connection on Windows serves a wide array of practical purposes, from professional work to personal leisure activities, offering users a powerful tool to stay connected to their Windows PC from virtually anywhere.

How to Use Remote Desktop Connection on Windows 10/11

Now that we understand what Remote Desktop Connection is, let's learn how to connect to it from your local computer. Here's a simple guide on how to get started with Remote Desktop Connection.

Step 1. Press "Win + I" to open the Settings app. Go to "System > Remote Desktop", and then click on "Enable Remote Desktop" and confirm when prompted.

Set Up Remote Desktop Feature on Windows

📌 Note: The Remote Desktop Connection feature has system requirements. If you are a Windows Home user, you may not be able to enable it. If you encounter similar problems, please read the post below for more information.

👉How to Enable Remote Desktop Windows 10: Easy Guide & Error Fixes

Step 2. On your local computer (whether it's a Windows PC, Mac, or another device), you need to open the Remote Desktop Connection application. On Windows, you can do this by pressing "Win + R" to open the Run dialog, then typing "mstsc" and hitting Enter. Alternatively, you can search for Remote Desktop Connection in the Start menu.

Step 3. In the Remote Desktop Connection window that opens, you'll be asked to enter the IP address or computer name of the remote PC you want to connect to. You can find this information on the remote PC by following the steps mentioned in the previous section (Settings > System > About > Device Name). After entering the correct details, click "Connect".

Step 4. Once you click "Connect", a login prompt will appear. Enter the username and password of an account that has remote access rights on the target PC. This could be your admin account or any user account you've granted access to.

Enter PC Address for Remote Desktop Connection

After logging in, you'll see the remote Windows desktop appear on your local screen, allowing you to control the PC as if you were sitting in front of it.

A Better Alternative: Connect to Your Windows PC Easily with DeskIn

If you're looking for a more stable and efficient remote desktop experience, consider using a more advanced tool: DeskIn. It stands out with several key advantages compared to the traditional Remote Desktop Connection, which makes the whole connection process quick and easy.

Click here to download DeskIn

DeskIn Official Website

Why DeskIn is the Smarter Choice?

  • High Stability and Ultra-Low Latency: With over 200 global acceleration nodes, DeskIn ensures stable, high-speed remote connections — even across continents. Unlike Remote Desktop Connection, which often lags on weaker networks, DeskIn keeps your operations smooth and responsive in any environment.

  • No Public IP or Complex Setup Needed: Forget about port forwarding, VPNs, or public IP addresses. DeskIn simplifies everything: just install the app, log in, and start controlling your PC — no technical barriers.

  • Access Anytime from PC, Mobile, or Tablet: DeskIn supports Windows, macOS, iOS, and Android, giving you full control across devices. Compared to Remote Desktop Connection, DeskIn's mobile access is faster, easier, and needs no extra configuration.

  • Free for Commercial Use: DeskIn's free plan allows remote control of up to three devices, even for business needs — a major advantage over Remote Desktop, which may require additional licensing depending on your Windows edition.

  • Perfect for Any Scenario: Whether working remotely, gaming, supporting clients, or retrieving files on the go, DeskIn adapts effortlessly. It offers smart features like automatic resolution adjustment, session reconnection, and robust encryption for secure access.

To make it easy to remotely access Windows PCs, you can check out the comparison table (based on DeskIn's latest feature set) below for an easier decision.

Feature

DeskIn Connection

Remote Desktop Connection

Connection Stability

Very stable, with high availability

May experience interruptions on weaker networks

Compatibility

Supports Windows, macOS, iOS, and Android

Only available for Windows PCs

Mobile Support

Full mobile/tablet support

Limited mobile/tablet options

Setup

Easy, no public IP required

Requires network configuration and a public IP

Ease of Use

Install & connect easily

Requires enabling system settings and firewall rules

Free Version for Business

Yes, up to 3 devices

Limited, requires the correct Windows edition

Connect to Your Windows PC Anywhere with DeskIn

Getting started with DeskIn is straightforward, even if you're new to remote desktop tools. Follow these simple steps to remotely access your Windows PC anytime, anywhere.

Step 1. First, head over to DeskIn's official website and download the appropriate version for your device — whether it's Windows, macOS, iOS, or Android. After downloading, install the app following the on-screen instructions.

Click here to download DeskIn

Step 2. Once installed, open the DeskIn application. If you already have an account, simply log in with your credentials. If you're a new user, you can quickly create an account within minutes — it's completely free.

Log into DeskIn on PC

Step 3. After logging in, just use the device ID and password on your target PC to connect. Then, select the Windows PC you want to control and initiate the connection. Now, you'll gain full remote access, enabling you to work, manage files, or troubleshoot issues from virtually anywhere.

Remote Access Windows via DeskIn

Final Words

In conclusion, whether you choose Remote Desktop Connection on Windows or switch to a more advanced tool like DeskIn, both options can enhance your remote desktop experience, making it more efficient and accessible.

While Remote Desktop Connection is a reliable solution for basic remote access, DeskIn offers higher stability, better compatibility across devices, and a more seamless connection for various use cases. By selecting the right tool based on your needs, you can enjoy a smoother and more productive remote working experience.

Click here to download DeskIn



Remote Desktop Connection Windows: How to Set Up & Use It?

Remote Desktop Connection Windows: How to Set Up & Use It?

Remote Desktop Connection Windows: How to Set Up & Use It?

With Microsoft officially discontinuing the UWP version of Remote Desktop, many users are now seeking reliable ways to connect remotely to their Windows devices. Fortunately, Windows still offers a built-in solution, Remote Desktop Connection, which allows users to access and control their PCs from virtually anywhere. Whether you're using Windows 10 or Windows 11, setting up a remote desktop connection on Windows remains a straightforward and effective way to stay productive across multiple devices.

In this article, we'll walk you through everything you need to know about enabling and using Remote Desktop Connection on Windows, address common issues you might encounter, and introduce a powerful alternative for those looking for even more flexibility and performance.

👀 Related Info:

Microsoft Remote Desktop Shutting Down: All You Need to Know

What Is Remote Desktop Connection?

Remote Desktop Connection is a built-in feature in Windows that allows users to connect to and operate a Windows PC from another device, regardless of location. Though Microsoft has released the Windows app as an updated solution, this tool is still useful if you want to access your work computers while traveling, provide remote support, or even collaborate with team members across different locations.

Remote Desktop Connection uses the Remote Desktop Protocol (RDP) to establish a secure connection between devices. Whether you're using Windows 10 or Windows 11, setting up remote desktop connection on Windows can significantly enhance your workflow, offering flexibility and convenience for a wide range of scenarios.

Common Use Cases for Remote Desktop Connection

  • Remote Work and Team Collaboration: With more businesses shifting to remote or hybrid work models, Remote Desktop Connection enables employees to access their office PCs from home or while traveling, ensuring they can continue working seamlessly on critical files and applications.

  • Remote Support and Troubleshooting: IT professionals and technical support teams frequently use Remote Desktop Connection to assist users with troubleshooting or to remotely configure settings on a device. This eliminates the need for in-person visits, saving time and resources.

  • Accessing Personal Files and Applications: Users can also utilize Remote Desktop Connection to access personal computers from their laptops or mobile devices, making it easy to retrieve files or run applications as if they were sitting right in front of their desktop.

  • Remote Gaming and Entertainment: Gamers can take advantage of Remote Desktop Connection to stream games from their gaming PC to another device, such as a laptop or tablet, for a seamless gaming experience, even while away from home.

In short, Remote Desktop Connection on Windows serves a wide array of practical purposes, from professional work to personal leisure activities, offering users a powerful tool to stay connected to their Windows PC from virtually anywhere.

How to Use Remote Desktop Connection on Windows 10/11

Now that we understand what Remote Desktop Connection is, let's learn how to connect to it from your local computer. Here's a simple guide on how to get started with Remote Desktop Connection.

Step 1. Press "Win + I" to open the Settings app. Go to "System > Remote Desktop", and then click on "Enable Remote Desktop" and confirm when prompted.

Set Up Remote Desktop Feature on Windows

📌 Note: The Remote Desktop Connection feature has system requirements. If you are a Windows Home user, you may not be able to enable it. If you encounter similar problems, please read the post below for more information.

👉How to Enable Remote Desktop Windows 10: Easy Guide & Error Fixes

Step 2. On your local computer (whether it's a Windows PC, Mac, or another device), you need to open the Remote Desktop Connection application. On Windows, you can do this by pressing "Win + R" to open the Run dialog, then typing "mstsc" and hitting Enter. Alternatively, you can search for Remote Desktop Connection in the Start menu.

Step 3. In the Remote Desktop Connection window that opens, you'll be asked to enter the IP address or computer name of the remote PC you want to connect to. You can find this information on the remote PC by following the steps mentioned in the previous section (Settings > System > About > Device Name). After entering the correct details, click "Connect".

Step 4. Once you click "Connect", a login prompt will appear. Enter the username and password of an account that has remote access rights on the target PC. This could be your admin account or any user account you've granted access to.

Enter PC Address for Remote Desktop Connection

After logging in, you'll see the remote Windows desktop appear on your local screen, allowing you to control the PC as if you were sitting in front of it.

A Better Alternative: Connect to Your Windows PC Easily with DeskIn

If you're looking for a more stable and efficient remote desktop experience, consider using a more advanced tool: DeskIn. It stands out with several key advantages compared to the traditional Remote Desktop Connection, which makes the whole connection process quick and easy.

Click here to download DeskIn

DeskIn Official Website

Why DeskIn is the Smarter Choice?

  • High Stability and Ultra-Low Latency: With over 200 global acceleration nodes, DeskIn ensures stable, high-speed remote connections — even across continents. Unlike Remote Desktop Connection, which often lags on weaker networks, DeskIn keeps your operations smooth and responsive in any environment.

  • No Public IP or Complex Setup Needed: Forget about port forwarding, VPNs, or public IP addresses. DeskIn simplifies everything: just install the app, log in, and start controlling your PC — no technical barriers.

  • Access Anytime from PC, Mobile, or Tablet: DeskIn supports Windows, macOS, iOS, and Android, giving you full control across devices. Compared to Remote Desktop Connection, DeskIn's mobile access is faster, easier, and needs no extra configuration.

  • Free for Commercial Use: DeskIn's free plan allows remote control of up to three devices, even for business needs — a major advantage over Remote Desktop, which may require additional licensing depending on your Windows edition.

  • Perfect for Any Scenario: Whether working remotely, gaming, supporting clients, or retrieving files on the go, DeskIn adapts effortlessly. It offers smart features like automatic resolution adjustment, session reconnection, and robust encryption for secure access.

To make it easy to remotely access Windows PCs, you can check out the comparison table (based on DeskIn's latest feature set) below for an easier decision.

Feature

DeskIn Connection

Remote Desktop Connection

Connection Stability

Very stable, with high availability

May experience interruptions on weaker networks

Compatibility

Supports Windows, macOS, iOS, and Android

Only available for Windows PCs

Mobile Support

Full mobile/tablet support

Limited mobile/tablet options

Setup

Easy, no public IP required

Requires network configuration and a public IP

Ease of Use

Install & connect easily

Requires enabling system settings and firewall rules

Free Version for Business

Yes, up to 3 devices

Limited, requires the correct Windows edition

Connect to Your Windows PC Anywhere with DeskIn

Getting started with DeskIn is straightforward, even if you're new to remote desktop tools. Follow these simple steps to remotely access your Windows PC anytime, anywhere.

Step 1. First, head over to DeskIn's official website and download the appropriate version for your device — whether it's Windows, macOS, iOS, or Android. After downloading, install the app following the on-screen instructions.

Click here to download DeskIn

Step 2. Once installed, open the DeskIn application. If you already have an account, simply log in with your credentials. If you're a new user, you can quickly create an account within minutes — it's completely free.

Log into DeskIn on PC

Step 3. After logging in, just use the device ID and password on your target PC to connect. Then, select the Windows PC you want to control and initiate the connection. Now, you'll gain full remote access, enabling you to work, manage files, or troubleshoot issues from virtually anywhere.

Remote Access Windows via DeskIn

Final Words

In conclusion, whether you choose Remote Desktop Connection on Windows or switch to a more advanced tool like DeskIn, both options can enhance your remote desktop experience, making it more efficient and accessible.

While Remote Desktop Connection is a reliable solution for basic remote access, DeskIn offers higher stability, better compatibility across devices, and a more seamless connection for various use cases. By selecting the right tool based on your needs, you can enjoy a smoother and more productive remote working experience.

Click here to download DeskIn



Remote Desktop Connection Windows: How to Set Up & Use It?

Remote Desktop Connection Windows: How to Set Up & Use It?

Remote Desktop Connection Windows: How to Set Up & Use It?

With Microsoft officially discontinuing the UWP version of Remote Desktop, many users are now seeking reliable ways to connect remotely to their Windows devices. Fortunately, Windows still offers a built-in solution, Remote Desktop Connection, which allows users to access and control their PCs from virtually anywhere. Whether you're using Windows 10 or Windows 11, setting up a remote desktop connection on Windows remains a straightforward and effective way to stay productive across multiple devices.

In this article, we'll walk you through everything you need to know about enabling and using Remote Desktop Connection on Windows, address common issues you might encounter, and introduce a powerful alternative for those looking for even more flexibility and performance.

👀 Related Info:

Microsoft Remote Desktop Shutting Down: All You Need to Know

What Is Remote Desktop Connection?

Remote Desktop Connection is a built-in feature in Windows that allows users to connect to and operate a Windows PC from another device, regardless of location. Though Microsoft has released the Windows app as an updated solution, this tool is still useful if you want to access your work computers while traveling, provide remote support, or even collaborate with team members across different locations.

Remote Desktop Connection uses the Remote Desktop Protocol (RDP) to establish a secure connection between devices. Whether you're using Windows 10 or Windows 11, setting up remote desktop connection on Windows can significantly enhance your workflow, offering flexibility and convenience for a wide range of scenarios.

Common Use Cases for Remote Desktop Connection

  • Remote Work and Team Collaboration: With more businesses shifting to remote or hybrid work models, Remote Desktop Connection enables employees to access their office PCs from home or while traveling, ensuring they can continue working seamlessly on critical files and applications.

  • Remote Support and Troubleshooting: IT professionals and technical support teams frequently use Remote Desktop Connection to assist users with troubleshooting or to remotely configure settings on a device. This eliminates the need for in-person visits, saving time and resources.

  • Accessing Personal Files and Applications: Users can also utilize Remote Desktop Connection to access personal computers from their laptops or mobile devices, making it easy to retrieve files or run applications as if they were sitting right in front of their desktop.

  • Remote Gaming and Entertainment: Gamers can take advantage of Remote Desktop Connection to stream games from their gaming PC to another device, such as a laptop or tablet, for a seamless gaming experience, even while away from home.

In short, Remote Desktop Connection on Windows serves a wide array of practical purposes, from professional work to personal leisure activities, offering users a powerful tool to stay connected to their Windows PC from virtually anywhere.

How to Use Remote Desktop Connection on Windows 10/11

Now that we understand what Remote Desktop Connection is, let's learn how to connect to it from your local computer. Here's a simple guide on how to get started with Remote Desktop Connection.

Step 1. Press "Win + I" to open the Settings app. Go to "System > Remote Desktop", and then click on "Enable Remote Desktop" and confirm when prompted.

Set Up Remote Desktop Feature on Windows

📌 Note: The Remote Desktop Connection feature has system requirements. If you are a Windows Home user, you may not be able to enable it. If you encounter similar problems, please read the post below for more information.

👉How to Enable Remote Desktop Windows 10: Easy Guide & Error Fixes

Step 2. On your local computer (whether it's a Windows PC, Mac, or another device), you need to open the Remote Desktop Connection application. On Windows, you can do this by pressing "Win + R" to open the Run dialog, then typing "mstsc" and hitting Enter. Alternatively, you can search for Remote Desktop Connection in the Start menu.

Step 3. In the Remote Desktop Connection window that opens, you'll be asked to enter the IP address or computer name of the remote PC you want to connect to. You can find this information on the remote PC by following the steps mentioned in the previous section (Settings > System > About > Device Name). After entering the correct details, click "Connect".

Step 4. Once you click "Connect", a login prompt will appear. Enter the username and password of an account that has remote access rights on the target PC. This could be your admin account or any user account you've granted access to.

Enter PC Address for Remote Desktop Connection

After logging in, you'll see the remote Windows desktop appear on your local screen, allowing you to control the PC as if you were sitting in front of it.

A Better Alternative: Connect to Your Windows PC Easily with DeskIn

If you're looking for a more stable and efficient remote desktop experience, consider using a more advanced tool: DeskIn. It stands out with several key advantages compared to the traditional Remote Desktop Connection, which makes the whole connection process quick and easy.

Click here to download DeskIn

DeskIn Official Website

Why DeskIn is the Smarter Choice?

  • High Stability and Ultra-Low Latency: With over 200 global acceleration nodes, DeskIn ensures stable, high-speed remote connections — even across continents. Unlike Remote Desktop Connection, which often lags on weaker networks, DeskIn keeps your operations smooth and responsive in any environment.

  • No Public IP or Complex Setup Needed: Forget about port forwarding, VPNs, or public IP addresses. DeskIn simplifies everything: just install the app, log in, and start controlling your PC — no technical barriers.

  • Access Anytime from PC, Mobile, or Tablet: DeskIn supports Windows, macOS, iOS, and Android, giving you full control across devices. Compared to Remote Desktop Connection, DeskIn's mobile access is faster, easier, and needs no extra configuration.

  • Free for Commercial Use: DeskIn's free plan allows remote control of up to three devices, even for business needs — a major advantage over Remote Desktop, which may require additional licensing depending on your Windows edition.

  • Perfect for Any Scenario: Whether working remotely, gaming, supporting clients, or retrieving files on the go, DeskIn adapts effortlessly. It offers smart features like automatic resolution adjustment, session reconnection, and robust encryption for secure access.

To make it easy to remotely access Windows PCs, you can check out the comparison table (based on DeskIn's latest feature set) below for an easier decision.

Feature

DeskIn Connection

Remote Desktop Connection

Connection Stability

Very stable, with high availability

May experience interruptions on weaker networks

Compatibility

Supports Windows, macOS, iOS, and Android

Only available for Windows PCs

Mobile Support

Full mobile/tablet support

Limited mobile/tablet options

Setup

Easy, no public IP required

Requires network configuration and a public IP

Ease of Use

Install & connect easily

Requires enabling system settings and firewall rules

Free Version for Business

Yes, up to 3 devices

Limited, requires the correct Windows edition

Connect to Your Windows PC Anywhere with DeskIn

Getting started with DeskIn is straightforward, even if you're new to remote desktop tools. Follow these simple steps to remotely access your Windows PC anytime, anywhere.

Step 1. First, head over to DeskIn's official website and download the appropriate version for your device — whether it's Windows, macOS, iOS, or Android. After downloading, install the app following the on-screen instructions.

Click here to download DeskIn

Step 2. Once installed, open the DeskIn application. If you already have an account, simply log in with your credentials. If you're a new user, you can quickly create an account within minutes — it's completely free.

Log into DeskIn on PC

Step 3. After logging in, just use the device ID and password on your target PC to connect. Then, select the Windows PC you want to control and initiate the connection. Now, you'll gain full remote access, enabling you to work, manage files, or troubleshoot issues from virtually anywhere.

Remote Access Windows via DeskIn

Final Words

In conclusion, whether you choose Remote Desktop Connection on Windows or switch to a more advanced tool like DeskIn, both options can enhance your remote desktop experience, making it more efficient and accessible.

While Remote Desktop Connection is a reliable solution for basic remote access, DeskIn offers higher stability, better compatibility across devices, and a more seamless connection for various use cases. By selecting the right tool based on your needs, you can enjoy a smoother and more productive remote working experience.

Click here to download DeskIn



專業、穩定、安全。

專業、穩定、安全。

專業、穩定、安全。

聯絡我們

電子郵件: support@deskin.io

總部: 6 Shenton Way, #36-01 OUE Downtown 1, Singapore 068809

版權所有 © 2025 Zuler Technology PTE. LTD. 保留所有權利。

聯絡我們

電子郵件: support@deskin.io

總部: 6 Shenton Way, #36-01 OUE Downtown 1, Singapore 068809

版權所有 © 2025 Zuler Technology PTE. LTD. 保留所有權利。

聯絡我們

support@deskin.io

6 Shenton Way, #36-01 OUE Downtown 1, Singapore 068809

版權所有 © 2025 Zuler Technology PTE. LTD. 保留所有權利。